
@Christopher > In all likelihood, your unit needs a service / tune-up. Please use the technical support links on the right to find an authorized service centre in your area.
Hi there i am using the silver DJM 600 mixer with 2x Technics 1210 turntables. I recently acquired the mixer second hand and although everything is working perfectly with the mixer i am having one small issue.
Channels 1 and 2 are louder than 3 and 4.
When i trim the signal coming into either channels 1 or 2 to 0db and push the channel fader all the way up to 10, the resulting output on the master fader (when also at 10) is 3db higher than the channel fader.
So when i push the channel fader to the top and the input is trimmed so it is within the green area, the master is in the red.
This is only for channel one and two. Channels 3 and 4 work as expected so that the master output signal is the same as the channel signal when both the channel fader and master fader are at maximum (10).
I want to know if this problem is fixable with replacement faders or if it is a problem with the circuitry between the channel and the master.
Cette publication n’accepte pas de commentaire.
@Christopher > In all likelihood, your unit needs a service / tune-up. Please use the technical support links on the right to find an authorized service centre in your area.