The Djm 2000 can not be Traktor Scratch Certificated!!!
The Hardware not allowed this!!!!!
Actions pour les commentaires
Publication
S’abonner
Please update the DJM-2000 driver/firmware so it has 4 inputs!
I'd really like to see the DJM-2000 getting the Traktor Scratch certification. The problem preventing it is that it only has 2 input-channels right now. This could be just a firmware/driver-limitation (but I didn't go through the circuit diagramm though).
At least you can already choose between having either 8 outputs or 2 inputs/6 outputs in the driver config of the DJM 2000.
Could you please ask the hardware engineers if it would be possible at all or whether its a hardware-limitation?
Cette publication n’accepte pas de commentaire.
Date
Votes
13 commentaires
Sorry, the hardware is not capable of being configured as such or it would have been done long ago.
Actions pour les commentaires
Can someone explain this to me please? I just traded my 900 for the 2000 (DJM) and the DJM2K is a 4 channel mixer. I am not understanding this...
Also, how can I use the DJM 2000 with Traktor Scratch 2? I don't mind if I don't use timecode as I have a controller too (I'll list my gear below for the reply)
Thanks in advance.
2 CDJ1000 MK3 --- 1 DJM2000 --- Traktor Scratch 2 --- NI X1 controller --- oxygen midi keyboard
Actions pour les commentaires
If you want to use the CDJs (to input timecode) you'll need to use an audio-interface other than the DJM's soundcard. If you just want to set it up for audio-output using the DJM-2000, you can do that.
Actions pour les commentaires
Thanks, I can live with that.
If you feel up to it, can you explain why not...I don't get it. The 900 was a 4 channel mixer too; why was that able too? sorry just curious that's all.
Thx again
Actions pour les commentaires
The 900 came out after the 2000 and was improved based on user feedback and requests, thus the 8/8 nature of the 900 rather than 8/0 (or 6/2) of the 2000.
Actions pour les commentaires
Sorry, I still don't get it... :-(
So how is this related to hardware? (not understanding) I see 4 physical outputs just like the 900 so how is this not a SW fix? Or is it that Pioneer does not want the DJM 2000 to be linked to DVSs? (I ask that due to the way it was marketed).
Sorry but I really want to understand this...Thx
Actions pour les commentaires
The OP is asking if the internal soundcard could be configured to allow for all 4 channels of input to send to the software, but that's not possible, even with a firmware or driver change.
Actions pour les commentaires
From manual:
DJM2000
|
Stereo Inputs
| 3 or 4
|
|
Stereo Outputs
|
0 or 1
|
DJM900
|
Stereo Inputs
| 4
|
|
Stereo Outputs
| 4
|
Actions pour les commentaires
@Pulse: What's OP?
@Gavin: LOL I'm even more confused. I see 2 outputs the XLR & the RCA one...LOL
I really don't get this, I'm sorry....
Actions pour les commentaires
@untitled > OP = Original Poster
Re: the ins/outs, it has nothing to do with the physical terminals; it's the soundcard inputs / outputs.
Actions pour les commentaires
Original poster
Actions pour les commentaires
thanks guys
Actions pour les commentaires