Have a feature request or suggestion? Post your idea here!

Publication

9 abonnés S’abonner
0
Avatar

no sound from speakers but well in headphones XDJ-RR

I've sound in headphones but not on my pioneed dj speakers. All seems to be connected correctly etc... Need help Tks

Nicolas Beckx

Vous devez vous connecter pour laisser un commentaire.

4 commentaires

0
Avatar
  • Make sure the Master Level knob is turned up on the XDJ-RR. This controls the output volume to the speakers. scratch geometry dash
  • Also, verify that the channel faders are up and the trim (gain) controls for the individual channels are set at appropriate levels.
  • Check if the Cue button (headphone cue) is activated for the headphones but not the Master Output. If the Master Cue is enabled, the sound might only be routed to the headphones.
  • Try disabling the Cue for individual channels and ensure only the Master channel is outputting sound.

 

Miguel Doyle 0 votes
Actions pour les commentaires Permalien
0
Avatar

Hello. Please try check that the Cue button (headphone cue) is turned on for the headphones but not the Master Output. If the Master Cue is activated, the audio may only be sent to the headphones.@drift boss 

Colby Adkins 0 votes
Actions pour les commentaires Permalien
0
Avatar

Hi fnaf, Here are some troubleshooting steps to resolve the issue of no sound from your Pioneer DJ speakers while sound is working through headphones. On the XDJ-RR, check the output settings. Ensure that the main output is selected and that the volume is turned up. Or you can check the mixer settings on the XDJ-RR.  Make sure the channel faders are up and that the master volume is not muted.

Mariah Carey 0 votes
Actions pour les commentaires Permalien
0
Avatar


If you're experiencing an issue where your Pioneer XDJ-RR outputs sound through headphones but not through the speakers, here are some troubleshooting steps and possible reasons for the issue:

1. Check Your Master Output Settings

  • Ensure the Master Output knob on the XDJ-RR is turned up to an appropriate level.
  • Verify that the channel faders are raised and the crossfader is in the correct position. (www.nsfas.org.za)

2. Verify Speaker Connections

  • Double-check the connection between your XDJ-RR and the speakers:
    • Are the Master Output cables (XLR or RCA) securely plugged into both the XDJ-RR and the speakers?
    • Are the speakers powered on and working? Test them by connecting them to another audio source.
  • If using active (powered) speakers, ensure they are not muted and the volume knobs on the speakers are turned up.

 

Traci Snyder 0 votes
Actions pour les commentaires Permalien