If you've turned on all of the CC parameters, you'll see that one of them is channel volume. If that is set to 0, you will not hear the AS-1 as it's being told to play silently. Either turn that parameter off or set it to something other than 0.
TORAIZ AS1 and DJS-1000 midi set up
Equipment: AS1, DJS-1000, DJM 900NXS2
I am trying to set up midi for AS1 with DJS-1000. Followed all the set up instructions as available from tutorials, videos etc.
Midi out from DJS-1000
Midi in to AS1
On AS 1 Global parameter settings - Selected Midi Slave, Midi all channels etc
On DJS-1000, selected track with input from TORAIZ AS1, enabled all midi settings, Activated all parameters as available in CC1 and CC2.
Audio out from AS1 to channel 4 on Mixer DJM900NXS2
Audio out from DJS-1000 to Channel 3 on Mixer DJM900 NXS2
I can hear audio when the track pad used on AS1
However, when I select scale mode of respective track on DJS-1000 there is no volume. I can see midi out is flashing on top right corner of DJS-1000 screen which means the signal is going from DJS-1000 to AS1. But no sound.
Please advice/assist on set up if any and let me know why there is no volume
Cette publication n’accepte pas de commentaire.
Hi Disco Devil, whats CC parameters ? , or where can i find it,
im really new on this , any help to connect my toraiz with the djs - 1000 will be really appreciate , 5 hours today trying everything .
Had the same problem. The solution is to press on the „SYNC“ button which is right next to the „SCENE“ and „PATTERN“ buttons in the bottom left part of the screen. Then select for „Midi I/F“ Select „DIN MIDI“. Then it should work
have the same problems. The cc paramaters what you talking about i can't find them. were i can find it to set it on.