
set TSP2 mixing mode to external, then map out the channels to use Deck A to use 1 and 2, Deck B to use 7 and 8. Make sure the pioneer config tool is set to 1 phono and 4 to phono. The mixer itself should have the selector set to USB
how you going guys
I just got my DJM 900 today and set it up with my technics 1200's for the first time today but am strugling with TSP2 to work with it i have follow the Youtube video but still no luck the calibration on deck a is way blown up and the calibration on deck D which is working but there is no control over the song i just updated the djm firmware
Any help would be much
cheers
Il post è chiuso ai commenti.
set TSP2 mixing mode to external, then map out the channels to use Deck A to use 1 and 2, Deck B to use 7 and 8. Make sure the pioneer config tool is set to 1 phono and 4 to phono. The mixer itself should have the selector set to USB
yeah there all in place, then deck a got controll though the BPM was way to fast and still nothing from deck B and the callibration from a is all over the place
@Nat > First and foremost, ensure you have the turntables connected to the phono inputs (as @Robert describes - channel 1 and 4). Next you need to set the mixer channel selectors to USB and run the mixer configuration tool to be sure to set the inputs to vinyl timecode. Once you have the timecode coming in, be sure to click the turntable icon and you should have control.
thanks for the help guys figured it out every time i run the pioneer config tool i reset it by changing to any other then phono and then change back again on both one and four thanks for the help.
Cheers