Hello team, I just bought a second hand Pioneer CDJ-800Mk2 which has an issue ejecting CDS. The fault is: after powering unit on all 4 autobeat loop lights flash constantly (my cdj-800mk1 doesnt do this dont think its normal), I insert CD, CD plays ok, tracking, skip and all functions appear to work ok but Eject button will not trigger the Eject event. If I wait for a while (ie 3 or 4 tracks) the 4 autobeat loop lights stop flashing and the eject button will work and triggers the eject cd event. Now CD gets jammed while trying to eject, makes a clicking noise, and Error E-9101 appears on screen.
So is it just the "SLOT-IN MECHANISM SECTION" assembly that needs to be replaced or the transverse motor by itself?. I already dissesembled and reasembled al looks ok to me and no missing teeth on cogs. Also I think the 4 flashing autobeat loop lights also indicates something else it wrong , ie. why wont the eject button at least try the eject CD? is this a logicboard issue. Would be easier to just replace the whol CD drive but Pioneer dont seem to have a part# for whole drive!
I also noticed this Mk2 wont go into service test mode so i can test all buttons. Hope its not logic board issue too!
<SNIP>
