Hey, I've just got some handydowns and since ii'm incompetent in the setup, i've just ran into problems which i'm unsure whether its the hardware of the software.
Current Set:
1 Laptop: Windows 8; Running Traktor 2.
2x CDJ400s - Updated Firmware to 1.33
- - - -> 4x RCA Connectors (for CDJ400s)
1 DJM400
1 Pair Of Headphones
CDJ400s Drivers:
Downloaded Driver from Pioneer HOME Support - - - -> Pioneer CDJ ASIO ver.1.200
Installation Issues: Skipped: Pionner_cdj_asio.dll (in System32)
Downloaded on a separate desktop (running Windows Vista) - - - -> Installed (This time pioneer_cdj_asio.dll is within System32) - - - -> Transferred file unto a USB Flashdrive - - - -> moved it into my laptop's system 32 - - - > removed read property. - - - > registered with C.M.D. - - - > went back to device manager - - - > search and install driver - - - - > Windows 8 can't find it.
Aggregation Issues on Traktor 2:
audio device: pioneer CDJ400 ( no connection) - - - - > pioneer CDJ ASIO (no connection) - - - - > downloaded ASI04ALL - - - - > no pioneer CDJ400 driver (refer to windows 8) - - - > no aggregation from ASI04ALL
I know that this system is older then the lint of my kindergarten uniform but i have figure out if its Windows 8 OS, The CDJ400 Driver or the Hardware. CDJ400s are probably the first DJ i've gotten my hands on so i hope you understand the circumstances.
Il post è chiuso ai commenti.
@kyle > Ok, lets just make sure everything works correctly first... Can you set up the CDJs and mixer as normal - that means connecting the CDJ into the Line / CD Input on the mixer via an RCA cable. Can you hear audio playing correctly on both players (say, from a CD)?
Then, you'll need to connect the CDJs to your laptop via USB cable.
You can follow the setup step-by-step here.
Huh, i guess i forgot to document
Hardware: RCAs Quality- Okay (Checked independently by running audio with my Iphone via converters except the power cords.), USB HIBs - Okay, Power Cords - Okay, Stereo Amps - Check, Headphones - Okay.
CDJ400s to DJM400s - Works: CDs, USB flashdrives and hardrives = Audio input and output good.
CDJ400s to Laptop (Traktor 2): Link with USB HIDs, Set to PC MODE. Traktor works with the Decks e.g CDJ400 #1(Turn Encoder - - - -> Deck A) = Traktor Deck 1 - - - -> Visual Match - Check, Jog Wheel Recognition Check - - - -> Audio Output is (Fine on Realtek High Def Audio) which means that the audio input from the CDJ400s to the computer is fine (Windows 8 is still not recognizing the two CDJ400s in the device manager (refer to OP)) and the computer as the audio output - doesn't go through the DJM400 hence incapable of mixing.
I've followed the instructions to the book, however the main issue is if what i believe is Windows 8 and its inability to recognize the drivers or at least a file from the driver. (continue to refer to my OP's installation issues)
I would really like to know if Windows 8 is interfering with the Driver Installation. Without the drivers i can't aggregate or even know if the CDJ400s are even working properly.
Well its been a few weeks and i managed to streamline the issue to just windows 8's inability to detect the cdj400's drivers. I've checked the driver itself and i looked over at the compatibility over the driver for it. It was registered for windows 7 or older versions. If that is the case could you look over the drivers compatibility with windows 8 OS again or if there is another driver installation program i could use for windows 8? I know its really vague but for the past few weeks i can't wrap my head around this issue after following your instructions to the letter. Please help me
Nvm, i'd like to start a new article concerning the compatibility issue considering this is just me documenting my problem without getting anywhwwew please close this
@Kyle > I've updated your other thread. I'll close this one - thanks.