firm recommendation. midi only, please!!

not be possible. the 350 midi controller will work just as simple, plug and play.? no drivers and no software. only the midi mapping.

- I have a sound card 8 channels. for use with vinyl control.

and a 4 card is not very expensive for the people. and the problem would be solved.

if run like my old vestax vci100. would be ideal.

I can connect and disconnect on the fly. and neither the PC nor sortware cause problems.

not think it is very difficult for programmers. of pioneer

From here a reliable option 100x100

pcmode the button. only activate the midi.!!!

and step LEDs make them work. please.

have greatly complicated the engineers. and the system 350. works well in parts, butnot in the set. I think.

P.D. at the end i learn English with pioneer and translate.google.es :-)

Dj Sandom 26 ottobre 2011 21:01

Il post è chiuso ai commenti.

Data Voti

10 commenti

The CDJ-350 DOES work as a simple-MIDI controller without drivers... I believe the Windows driver is required for the soundcard only.

Pulse 28 ottobre 2011 16:56 0 voti

ok. Thank you.

but the issue of the LEDs. could not do anything.

I want to add the controller x1 for effects. and the LED does not go well.

if you say to pioneer. to add. LEDs return to midi ...

all midi controllers operate the LEDs. cdj350 why not?

is the most basic

Dj Sandom 28 ottobre 2011 23:00 0 voti

You can address the LEDs on send, you just need to know how!

Pulse 29 ottobre 2011 15:36 0 voti

midi map pioneer. No LEDs are configured.

operate independently of the software.

for this reason. with the mouse or another midi controller. no change in the state of cdj350 leds.

in the next firm has to solve.

also when pc mode (midi). eject button, remove the cd (The plastic cd). if you are inside the unit.

you could make some improvements. for next firm.

talk to the engineers and programmers. I have no problem to help one

Dj Sandom 29 ottobre 2011 20:43 0 voti

I think the Pioneer. have not done the necessary tests in the cdj 350

Dj Sandom 29 ottobre 2011 20:46 0 voti

@steven > The problem isn't the CDJ, it's the software not sending a change-state to the LEDs!

Pulse 31 ottobre 2011 05:52 0 voti

I think ... the map midi, Pioneer has not configured leds.

and change state. then run only via hardware.

put something in the manual on this subject.

it's a shame they do not work. in a device of this quality (and price)

this would be the most reliable operation. but the leds to confuse me a lot

engineers will know if this is possible.

the hid. I do not think that works perfectly ever.

cdj350 and becomes obsolete. and not to buy a new one every 2 years

Thank you.

Dj Sandom 31 ottobre 2011 22:50 0 voti

@steven > Allow me to explain...

When you press a button on the CDJ, you are triggering a MIDI event and with that, mapped in the software, you can tell the hardware to change an LED.

If you click on something within the software, however, that does not have the ability to send a hardware change-state to the LEDs on the player.

So in essence, if you press the LOOP-IN button on the CDJ, you can get it to blink when correctly mapped within the software. Clicking the loop-in button on the software will NOT get the LED on the LOOP-IN button to blink.

This is a limitation of the software, not hardware.

Pulse 3 novembre 2011 14:52 0 voti

HID mode. LEDs work well (via software or hardware)

to midi mode. has the same function

the firm of cdj350. be updated

Dj Sandom 6 novembre 2011 11:07 0 voti

I think there is a communication breakdown occurring here.

Pulse 7 novembre 2011 16:10 0 voti