Have a feature request or suggestion? Post your idea here!

Post

4 follower Segui
0
Avatar

djm midi control for traktor scratch pro 2

hi, i just want to ask, why traktor will not recognise my djm2000 as a controller- ive done everything, downloaded the tsi file, updated to the latest firmware version, switched on the midi everything! and i still cant get it to work, i also have a pair of cdj2000 hooked up and that works fine, could the signals be intercepting eachother? also theres a midi out port, do i need to use that? please heelp! i see all the videos on youtube plug straight in and works- why oh why meeeeeee!

no1

Accedi per aggiungere un commento.

16 commenti

0
Avatar

@no1 > Where did you get the TSI for the DJM2000?  Pioneer doesn't provide one... it's not as simple as "plug and play"; you need to configure the MIDI mappings (if you aren't already using a DJM2000-mapped TSI file that you imported properly).

Pulse 0 voti
Azioni per commenti Permalink
0
Avatar

I dowloaded tsi. from http://www.traktorbible.com/freaks/mappingone.aspx?id=122-
Import procedure
Traktor settings> import
Also when I try to configure manually i.e. Traktor settings> controller manager> add in> learn> press button on midi pad- assuming this is the right procedure- nothing changes-
Pls any help will be appreciated- apologies for cross posting-

no1 0 voti
Azioni per commenti Permalink
0
Avatar

@no1 > Did you press the MIDI ON/OFF button on the mixer?

Pulse 0 voti
Azioni per commenti Permalink
0
Avatar

so i take it no answer in as many days, means i've done everything right and there must be a fault with the djm itself?

no1 0 voti
Azioni per commenti Permalink
0
Avatar

No, it just means I've been busy and haven't had the opportunity to address your issue further.

Pulse 0 voti
Azioni per commenti Permalink
0
Avatar

Hey pulse, thanks for your reply- i sorted it out earlier today as it happens- everything working great, endless posibilities :D

no1 0 voti
Azioni per commenti Permalink
0
Avatar

The problem with the alonso.tsi file is that the "in and out" ports for the midi controller(traktor settings> controller manager) are still mapped to the original djm that was used in creating the file, so i changed the "in and out" port to my own djm(traktor settings> controller manager> click down menu for "in port"> select djm2000) repeat same procedure for "out port" and select none. Easy solution--was a simple problem in the end-- always knew i could trust pioneer hehe (o_x)

no1 0 voti
Azioni per commenti Permalink
0
Avatar

Ah yes, the MIDI ports.  Those will vary from USB port to USB port, even on identical machines they may have different numbers.  Thanks for reporting back!

Pulse 0 voti
Azioni per commenti Permalink
0
Avatar

witam. jestem zainteresowany kupnem miksera pioneer djm t1. nikt nie jest w stanie dokładnie potwierdzić lub zaprzeczyć czy w momęcie kiedy gram ze zwykłego winyla ( nie tego traktorowego) dzwięk jest tak przetwarzany przez mikser i program ze będa działały efekty, czy tylko suwaki i EQ.????

dzięki i pozdr.

marcin 0 voti
Azioni per commenti Permalink
0
Avatar

@Marcus > The DJM-T1 can play normal vinyl as well as timecode.  The non-timecode CAN be routed through the mixer so as to use the audio effects of the software, but obviously there would be no hotcues or looping.

Pulse 0 voti
Azioni per commenti Permalink
0
Avatar

kiedy zmieniam timecode na non-timecode musze jeszcze zmieniać jakieś ustawienia w mikser lub traktor ???

 

dzięki za pomoc :)

marcin 0 voti
Azioni per commenti Permalink