Using RMX 1000 with djm 900 nexus in send and return mode, the channels selection can be made using rotary selection master channel ( the rotary bottom on the right side of the mixer)? And the mixer rotary effects bottom can be put on send and return mode? The other channels ( 1, 2, 3,4) have no monitoring (control) by RMX 1000? Please let me known as soon as possible. Thanks. Adry.
Ok, now I understand. Thank you for the video.
When the selector knob is set to MASTER, the master volume knob controls the volume of the effect.
When the selector knob is set to a CHANNEL, the channel fader controls the volume of the effect.
Il post è chiuso ai commenti.
I'm not sure I understand the question.
If the channel selector is on MASTER, all channels will be sent to the RMX. If you want to apply the FX to one channel, then you should select only that channel.
In other channels there is no effects. There are effects only if I put rotary botton in send and return and rotary bottom in master. Please can you send me a pioneer tutorial regarding the RMX 1000 set up with Djm 900 Nexus?
When I put rotative bottom in master and send and return there is no problem. The echo channel exit is on all channels. But if I put the rotative bottom in send and return and rotary bottom in channels 1 or 2 ( for example) there is the effects but if I put down the fader there is no echo channel exit.
For connecting the RMX 1000 at DJM 900 Nexus I followed the pattern n°1 on page 6 of the RMX 1000 Manual (connection in send & return Mixer terminals). In this case I must connect a PC?
No, you do not need a PC. When using the mixer's onboard FX, the FX are post fader. When using an RMX or EFX, they are pre fader.
Can you please record a video of your problem and post a youtube or dropbox link for me to view? Thank you.
Dear Mark,
as your request here with enclosed you can find link for video regarding my problem.
Dear Mark, Thanks a lot for your answer.
As It is clear from the video I sent you, my mixer is functioning properly? Everything is ok? Or there are some wrong settings?
Thanks and Best Regards.
In send & Return mode and with selector knob sets to Channel (1,2,3,4...) the functionality is the one shown in my video? Or Is there a way to get back the "Return" in channel (1,2,3,4...)?
@Adry > Yes, your mixer is functioning properly. Sorry for the confusion.