Have a feature request or suggestion? Post your idea here!

Post

3 follower Segui
1
Avatar

Chauvet DJ - Gigbar MOVE

Hello,

Could you please add support for the brand new Chauvet DJ Gigbar Move. The Gigbar Move is identical to the Gigbar 2 (which is fully supported by Rekordbox Lighting), but adds a pair of moving heads.

Manufacturer: Chauvet DJ

Model Name: Gigbar MOVE

Fixture type: Multiple (Par/Darby/Strobe/Laser/Moving Head)

Product website: https://www.chauvetdj.com/products/gigbar-move/

Product manual: https://www.chauvetdj.com/wp-content/uploads/2020/01/GigBarMove_UM_1-9-20.pdf

DMX channel mode: 35 channels

NOTE: The 23 first channels of this fixture are *identical* to "Chauvet DJ - GigBAR 2 (10051204)(23 Channel Mode, 23 chs) -  [Rekordbox is Ready]", that already has excellent support in Rekordbox Lighting. The Gigbar Move simply builds on the Gigbar 2 by adding a pair of moving heads. The first 23 channels of the Gigbar Move are identical and interchangeable with the Gigbar 2. 12 additional channels (ch24-ch35) have been added for controlling the two new moving heads (6 channels per head for pan/tilt/dimmer/strobe/color/gobo each).

Thanks,

Peter

DJ Straftanz Completato

Accedi per aggiungere un commento.

4 commenti

0
Avatar

Is the GIGbar Move going to be [rekordbox ready] anytime soon? It is not usable as it is listed in the fixtures right now. 

Livingst0ne 0 voti
Azioni per commenti Permalink
2
Avatar

Hello,

I just received my Gigbar Move fixtures and found out that support for the Gigbar Move is totally horribly broken. The Gigbar Move shows up as just 1 single PAR.

The 23 first channels of the Gigbar Move is 100% backwards compatible with the Gigbar 2, so at least we'd expect this to work, but no, it does not. (The Gigbar 2 correctly shows up as 2 pars, 2 derbys, laser, and strobe).

The Gigbar Move should show up the same way: 2 pars, 2 derbys, laser, and strobe (all these identical to the Gigbar 2). However, in addition to this the Gigbar Move has two 6ch moving heads.

Setting up the Gigbar Move as a Gigbar 2 with a pair of Chauvet DJ Intimidator Sport 155 (6ch) makes things *almost* work. Pars, derbys, laser, and strobe works 100% correctly. The moving heads move correctly. However, unfortunately the channel assignment for dimmer and color are different on the Gigbar Move, so sadly this setup does not function although it's almost there...

You have all there and it would be trivial to make it work. This is how to make the Gigbar Move (35ch) fixture work:

-Duplicate the Gigbar 2 (23ch) fixture for channels 1-23. No changes needed
-Duplicate the Initmidator Spot 155 (6ch) moving head (MH) fixture twice for channels 24-29 (MH1) and 30-35 (MH2).
-Change the dimmer channel for MH1 and MH2 to correspond to the assignments on the Gigbar Move: Channel 26 (MH1) and 32 (MH2) is DIMMER 0-100% (000-255) on the Gigbar Move (The Intimidator Spot 155 has the color wheel on this signal).
-Change the color wheel channel for MH1 and MH2. Channel 28 (MH1) and 34 (MH2) is COLOR WHEEL on the Gigbar Move (The Intimidator Spot 155 has the dimmer function on this signal).
-Configure the color wheel channel values for MH1 and MH2 to be in the correct range: 000-031=White, 032-063=Blue, 064-095=Orange, 096-127=Red, 128=159=Cyan, 160-191=Yellow, 192-223=Green, 224-255=Magenta
-For correctness, update the strobe channel for MH1 and MH2 to use the full range for strobe: Channel 27 (MH1) and 33 (MH2) is STROBE 0-100% (000-255) on the Gigbar Move (The Intimidator Spot 155 uses this channel for shutter and strobe).

As you can see, this is a very trivial task, so I hope you can get someone to implement this and make the Gigbar Move fixture usable with Rekordbox Lighting.

Thanks,

Peter

DJ Straftanz 2 voti
Azioni per commenti Permalink