Dear PioneerDJ Team,
would it be possible to add a kind of "virtual" fixture to the database that has only a single DMX channel with a permanent value of 255 (independent to any phrase, mood, etc.)?
Let me try to explain the background of my request:
I own two T-bars Eurolite KLS-180. Besides some small strobe LEDs (which are not important for me) these bars consist of four PAR lights.
I can add the fixtures to my venue and assign either a type of "Bar" or "Par". In general everything works fine, but the problem is that all four Pars act as a single device ( they are either all on, all off or all show the same colour).
Theoretically, each of the four Pars of this T-Bar could be controlled individually, if it would be possible to tell Rekordbox that each of the Pars is a single, dedicated device.
The Eurolite KLS-180 has a 21channel mode, where 16 of the channels are used to control RGBW information for each dedicated PAR (4*4 channels).
I thought about picking out a 4channel PAR fixture from the database (e.g. the Stairville Quad Par Profile, but there are dozens of equivalent fixtures) and assign it four times in a row to "emulate" the 4x4 rgbw channels of the KLS180.
However, there is a missing piece: I need to set the first channel of the KLS 180 to a permanent value of 255 ( this is the Dimmer) in order to let the 4 Pars control their colour and intensity on their own.
If you could implement a "permanent on" 1-channel Dummy fixture, this would allow similar workarounds also for other "multi-PAR" devices.
Many thanks in advance for your support!
Greetings from Germany