DJM S7 with CDJ
I have ordered a S7 mixer, and will normally be using this with vinyl (and most likely Serato in the future). But from time to time I DJ with one or two CDJ-2000/2000NXS/2000NXS2 in addition to turntables. Is it possible to map the cue points on the CDJ's to the pads on the mixer?
And load tracks etc? If not, any plans on an update to implement this? Seems as since there is a USB connection for CDJ's, all that is required is a software/firmware update to support this.
Accedi per aggiungere un commento.