Have a feature request or suggestion? Post your idea here!

Post

4 follower Segui
1
Avatar

Pre-fader Send Effects DJM V10

Hi, I am using a DJM V10 LF with CDJs and some external effects.

Loving the V10, apart from the fact that the sends are post-fader and there's no option to switch, as can be done on the Xone 96 and Model 1.

I'm guessing this was a very deliberate design choice, but with it being a digital mixer, can't think of a reason that there couldn't be the option added to change mode in the settings.

Would it be possible to include this in a firmware update?

Thanks - Mike

Michael Moruzzi

Accedi per aggiungere un commento.

4 commenti

0
Avatar

I would like to echo this request...or is there a workaround?

Patrick Spiers 0 voti
Azioni per commenti Permalink
0
Avatar

Yes this needs to be added so we can hear what we are mixing into the master.

Blk VVolf 0 voti
Azioni per commenti Permalink
0
Avatar

interestingly, this works as expected when using multi I/O 1/4" patch cords
and setting Multi I/O to ch2/ch5 1/4" Regardless of the setting of the send knob on channel 5.

NOTE: kindly do NOT change this!
ver 1.11

SonicWeaver 0 voti
Azioni per commenti Permalink
0
Avatar

and, yes I agree with the above.
Send should be pre-fader on EXT1 & EXT2
In this manner you would never be forced to ALWAYS blend the source channel with A separate return FX channel using either EXT1 OR EXT2
OR At least an option in the set up menu for the V10 mixer - "SEND pre/post fader" option

Kindly make a consideration for this important request.

WELL DONE, FANTASTIC MIXER!

SonicWeaver 0 voti
Azioni per commenti Permalink