Model Name / Number: WLED
Fixture Type: LED Panel / PAR / BAR / LED Strip (Addressable)
Link to product website: https://kno.wled.ge/
Link to product DMX Manual: https://github.com/Aircoookie/WLED/wiki/E1.31-DMX
DMX channel modes:
1: Single RGB
All LEDs are set to the same color. 3 Channels: Red, Green, Blue
2: Single DRGB
All LEDs are set to the same color. 4 Channels: Master Dimmer, Red, Green, Blue
Not a realtime mode. Allows setting WLED effect properties over E1.31 with 11 or 13 channels.
||Effect mode ID
||Effect palette ID
||White Primary (channel optional)
||White Secondary (channel optional)
4: Multiple RGB
3 Channels per LED in sequence. LED 0 Red, LED 0 Green, LED 0 Blue, LED 1 Red, ... Default mode, equivalent to pre-0.9.1 E1.31. This is the mode you want to use for xLights and LedFx.
5: Multiple DRGB
Like Multiple RGB, but the first channel is a brightness control. Master Dimmer, LED 0 Red, LED 0 Green, ...
I have a RB-DMX1, I have a DMX to Artnet node. And I have Artnet Wifi LED Panels and Strips. Each are addressable LEDs. Now I can use it as single RGB or Multi RGB but I run out of channels really fast.
I would like to ask You guys if I see correct:
- Rekordbox can not send effects on addressable leds, it uses just as a PAR light. ( All leds are the same color)
- Could you make a fixture for this awsome opportunity to go beyond limits?
I was thinking in binding
1 Master Dimmer - Master dimmer
2 Effect mode ID - Gobo
3 Effect speed - ?don't know what is in rekordbox (BPM?)
4 Effect intensity - ? fixed 128 (50%) would be good
5 Effect palette ID - Color wheel
---------- this could be the end, I can drop in some simple rgb(3chanel) after this, but if you prefer better to be in one fixture, but I would be happy with above :)
6 Red Primary - Red PAR1
7 Green Primary - Green PAR1
8 Blue Primary - Blue PAR1
9 Red Secondary - Red PAR2
10 Green Secondary - Green PAR2
11 Blue Secondary - Blue PAR2
--- optional channels not needed by me.