
Hey there,
Sorry to hear about this - it's the first time anyone has raised this issue. I'll pass it to our product teams to see if they have any recommendations.
!Tour1 Set funktioniert nicht zusammen mit CDJ 3000!
Leider bringt der Neue CDJ 3000 das komplette System
von DJM TOUR 1 (sowie CDJ TOUR 1) zum abstürzen?!
Auch spielt das Display der DJM Tour1 völlig verrückt (BPM Anzeige + Trackliste).
Zudem kann auf verschiedene Funktionen (Vorhören)
beim CDJ 3000 nicht zugegriffen werden...
Hier ist dringend ein Firmware Update erforderlich,
wenn man keinen Schaden am Tour1 Set verursachen möchte...
MfG
Verlag Hawelka
Uwe Hawelka
Il post è chiuso ai commenti.
Hey there,
Sorry to hear about this - it's the first time anyone has raised this issue. I'll pass it to our product teams to see if they have any recommendations.
Hallo...
Das wäre sehr schön, da ich glaube, daß das TOUR1 Set
beim Betrieb der CDJ 3000 "Schaden" nehmen könnte!
Auch haben wir uns extra die Neuen CDJ 3000 gekauft,
um Sie mit dem TOUR1 Set nutzen zu können.
Ein Betrieb der CDJ 3000 ist jedoch so in "keinem Fall" möglich!
Somit stehen hier 2x Player, die wir nicht in Betrieb nehmen können?
Anmerkung!
Alle Geräte verfügen über die aktuelle Firmware!
Alle Fehler kann ich zudem gerne auch genauer mitteilen (wenn gewünscht).
best regard
Verlag Hawelka
Uwe Hawelka
Uwe,
Can you tell me if the problem is simply the waveforms not appearing? Or does the DJM-TOUR1 actually freeze up and cease function?
Hello...
Alle 3 TOUR1 Geräte (DJM + CDJ) stürzen komplett ab!
Der Monitor wird schwarz!
Das System fährt dann bei allen 3 Geräten gleichzeitig
„neu hoch“ und die Fehler gehen von vorne los.
Weitere Fehler im TOUR1 DJM / CDJ
- Wave Formen werden zum Teil nicht angezeigt
- BPM Zahlen werden „nicht“ angezeigt, nur wilde Zeichen flimmern in der Anzeige
- CDJ laufen teilweise nicht synchron
- System stürzt bei allen 3 Geräten gleichzeitig komplett ab (Musik läuft weiter)
Weitere Fehler bei CDJ 3000:
- Vorhören ist nicht im DJM möglich
- CDJ laufen teilweise nicht synchron
- wenn USB Stick im CDJ 3000 eingesteckt wird,
wird die Trackliste zum Teil „im DJM Tour1“ nicht richtig angezeigt
best regard
Our engineers are looking into this, thanks for your patience.
Many thanks...
What do you mean, when we can use our new CDJ 3000
with the Tour1 System?
best regard
Unfortunately we don't have any other information available at this time - our engineers are investigating.
Hallo...
Leider gibt es weiterhin "keine" Neue Firmware?
Es wäre gut zu wissen, ob Pioneer überhaupt etwas an diesem Problem ändern wird?
Sonst muss ich mir extra wegen dieser Fehler meine Geräte wieder verkaufen, da Pioneer TOUR 1 und Pioneer CDJ 3000 nicht zusammen funkionieren!
Es wäre schön zu wissen, ob es hier Abhilfe geben wird , oder nicht?
best regard
I am having similar issues to the OP with my setup.
I have 2xCDJ-Tour1, 1xDJM-Tour1 and 2xCDJ-3000 all decks are connected via supplid ethernet cables into the DJM-Tour1 integrated hub.
If I plug my USB stick into a CDJ-3000, the 2xCDJ-3000 decks can see/browse the tracks, but the CDJ-Tour1 and DJM-Tour1 do not appear to recognise it.
If I plug my USB stick into a CDJ-Tour1, all devices appear to recognise the media on the stick. I am able to play tracks on all 4 decks and these play from the mixer as expected (good so far). The DJM can also see and browse the tracks from the USB (also good).
Where it falls doen is that on the DJM and the 2xCDJ-Tour1 the view on the attached screen when in either horizontal or vertical waveform mode only works properly for the 2xCDJ-Tour1 devices. For the CDJ-3000 devices the channels cannot display the name of the track, the BPM display shows the correct BPM but this is jittery and cycles through a loop of showing the correct bpm for a few hundred ms, then displaying some seemingly random numbers for a few hindered ms then repeating.
The waveforms for the CDJ-3000 decks do not appear on the DJM-Tour1 screen either. The place where the waveform should appear shows a blank white line for a few hundred ms, then the line disappears for a few hundred ms then re-appears.
Has there been any further investigation into what the cause of this problem may be?
NOTE: My CDJ-3000s are set as Player 1 and Player 4, with the CDJ-Tour1's set to Player 2 and Player 3.
Hey Gary,
We're aware of the issue and it will require an update to the Tour1, but we don't have one available just yet. At this time we recommend connecting the USB to either CDJ-TOUR1 or CDJ-2000 models rather than the CDJ-3000.
Thanks for your patience while our team works to create the fix.
Hello,
but the Link Cue does not work on TOUR 1 with the CDJ 3000 either to!
best regard
Yes, we're aware of that - thanks.
I seem to be experiencing similar issues with my DJM-TOUR1 in combination with the CDJ-3000. Were you able to solve this issue?
I certainly didn't. I had to buy a new mixer to solve the problem as I couldn't wait for an update (that appears never to be coming) Now I have a rather expensive Tour1 that is basically useless to me.
Hi...
Ja, auch ich habe jetzt den TOUR1 DJM Mixer und kann Ihn „nicht mehr“ benutzen😣😣
Ich hoffe noch auf ein „Update“, habe mir aber schon einmal den „DJM V10“ als Übergangslösung kaufen müssen!!
Sehr ärgerlich!