Have a feature request or suggestion? Post your idea here!


3 follower Segui

Problems Setting up DVS with DJM 250MK2 and Mac

I’m trying to set up 1210’s with a DJM 250MK2 and a Mac (also with DDJ-XP2. I have the DVS coded vinyl but I can’t get it to work. Any instructions on how to set this up would be really appreciated.
Much Left Con risposta

Commento ufficiale


If you're on a Mac, first, make sure that you've allowed the drivers through security - they may look like they're installed, but the OS blocks the operation of the hardware; High Sierra through Catalina instructions here, Big Sur instructions here, M1 CPU instructions here.

After that, allow rekordbox access to the audio input by going to System Preferences > Security & Privacy > Privacy > Mic (left) > rekordbox (right) and add a check. You may need to unlock the panel first.

Open the DJM-250MK2 Setting Utility App and verify that you've selected the correct input for the DVS (control tone phono):

Mine shows greyed-out because it's not connected.

Set the channel inputs on the mixer to the PC / USB, not PHONO.

Open the DVS calibration page - if you don't see the green circles, go back to the Setting Utility and toggle the input selector from PHONO to anything else, then back and try again.

Let us know if that works.

Azioni per commenti Permalink

Accedi per aggiungere un commento.

2 commenti


I’m pretty sure the drivers are installed and DVS is checked in settings.

Much Left 0 voti
Azioni per commenti Permalink