
Hey Antony,
Have you granted rekordbox access to the mic (audio input) in System Preferences > Security & Privacy > Privacy?
Hi
I have a problem with the DJM250mk2.
Installed all the drivers and firmware as explained where i can find info on this subject, including all privacy setting including the mic tick box on a Macbook pro M1 running Bigsur.
Reckordbox shows the mixer being turn on and off and when you choose your mixer channel switches from phono to usb, but nothing showing on the DVS calibration ring even with the slider to change the size of rings.
Also using turntables with the pioneer coded vinyl.
The DJM-250MK2 Setting Utility App shows the mixer is connected.
Is this a UNLOCK HARDWARE issue??
It all worked fine when i was using v4 on el capitan!
Il post è chiuso ai commenti.
Hey Antony,
Have you granted rekordbox access to the mic (audio input) in System Preferences > Security & Privacy > Privacy?
hi
yes did that!
everything i have tried is written above.
I've watched vids and read forums on this subject, and no go!!
Just to verify, these are the instructions you followed for the M1 driver install?
hi
yep followed those instructions.
I've installed the 1.06 firmware into the mixer and installed audio driver 3.00 for bigsur.
the driver is installed because reckorbox shows when i change the mixer inputs i.e.. phono to usb on both channels or if its on or off.
on the mac, utilities-system information- shows their is no disabled drivers from privacy issue
macOS Big Sur
Version 11.2.3
Apple M1 chip
memory 16GB
Could you show a video of the issue, and go through the rekordbox DVS page and audio settings?