Hey, I've noticed for the second time today, my S-DJ05's have had trouble turning on when I press the power button on the controller.
Connection:
Controller into "In" on right speaker, cable from "Out" on right speaker to "In" on left speaker.
What happened:
Power switch off on both speakers. (No lights, nothing)
Turn Power switch on left speaker first. Then turn power on right speaker second. (Red lights turn on as switch was turned on)
Press power button on controller. (Red light turns to blue and "Input 1" lights up blue on right speaker, left speaker stays red)
Trouble shooting:
Continues from Step 3 from above.
Press power button on controller again. (Right speaker turns back to red light, and "Input 1" goes out. Nothing happens to left)
Press power button on controller again. (Red light turns to blue and "Input 1" lights up blue on right speaker, left speaker stays red)
3. Press power button on controller. (Right speaker turns back to red light, and "Input 1" goes out. Nothing happens to left)
Switch off power on back of both speakers. (Red lights go out on both speakers)
Switch on power on back of both speakers approximately the same time. (Red lights show up on both speakers)
Press power button on controller. (Red light turns to blue and "Input 1" lights to blue on right speaker, left speaker stays red)
Press power button on controller again. (Right speaker turns back to red light, and "Input 1" goes out. Nothing happens to left)
Switch off power on back of both speakers. (Red lights go out on both speakers)
Double check connections for controller "In", link "Out", and link "In". (All connections are still connected and not loose)
10. Switch on power on back of both speakers approximately the same time. (Red lights show up on both speakers)
11. Press power button on controller again. (Red light turns to blue and "Input 1" lights to blue on right and left speakers)
So it finally works okay...
I've babied these, along with all the cables. I have barely used them and this is the second time it has happened. There is no damage that I can see or could have caused to these or the cables. Everything should work perfect as I bought them new.
I would like some thoughts or help with this situation if possible please.
Has anyone had any troubles similar to these with their new speakers?
Does anyone have any idea why mine might have been so difficult when trying to power them on from the controller?
Could it be a faulty connection or cable even though I thought all my cables we connected as the should be?
Is there an order of how I need to power on these speakers? (Right to left instead of left to right... the same time...)
Should I contact Pioneer on the phone about this issue?
Any help or thoughts would be greatly appreciated.
Thanks in advance.