You connect the RCAs from the sound card to each speaker; one left, one right.
The link cable is used to link the control from the volume knob to each speaker at the same time.
Hello All-
Thanks in advance for your help.
I currently have a Asus Essence STX Sound card, and have MAudio AV40's connected via RCA cables and a splitter .
I just received my (2) new SDJ05 monitors :
http://www.pioneerelectronics.com/PU...peakers/S-DJ05
https://www.asus.com/Sound_Cards/Xonar_Essence_STX/
and am having some issues connecting.
1) The speakers come with 2 sets of RCA outputs, but just 1 RCA plug per output, the card has 2 RCA plugs? do I just use 1 male to male RCA for each speaker and connect to RCA's on card?
2) Also, the speakers come with a link cable, do I need to connect both the link cable and no RCA cable from the 2nd speaker? or do I need to connect an RCA cable from each speaker to the card and the link cable?
3) The speakers have TSR cable, but not sure how I could connect both speakers using this t essence STX?
These are the connectors on the card:
Analog Output
1 x 6.3 mm jack (1/4") Headphone out
2 x RCA (Un-Balanced)
Analog Input
1 x 6.3 mm jack (1/4") (Line-in/ Mic-in combo)
Digital
1 x S/PDIF out
1 x Front-Panel Header
1 x Aux in (4-pin header)
I own them already so other speakers or sound card not an option right now. I need to find a workable solution with this equipment.
How would you connect them?
投稿コメントは受け付けていません。
You connect the RCAs from the sound card to each speaker; one left, one right.
The link cable is used to link the control from the volume knob to each speaker at the same time.
Users may get trouble regarding such sound problem in any speakers. soundcloud downloader In fact, it happens to me as well.