Have a feature request or suggestion? Post your idea here!

投稿

2フォロワー フォローする
0
Avatar

[SOLVED] DDJ-S1 and Bose L1M2 System Questions

Hey guys,

I'm sure there are lovers and haters of the Bose L1 system, but let's keep this positive please. I have the Bose L1 Model 2 system with a pair of their new B2 subs. Is anyone else using this or a similar system? I am just curious about a few things:

1-Where do you have that 0, -6, -12 switch set on the back of the DDJ?

2-Where are you running the trim on the Bose Powerstand?

3-What are your settings under "setup" on the Itch program? Especially the part in the photo attached to this post.

I am just trying to get the optimal sound out of my system. I love it so far, but I have some tweaking to do. Also, does the bitrate of these files really make a huge difference?

Thanks for the input!

djjoebunn

投稿コメントは受け付けていません。

2件のコメント

0
Avatar

The long and short of all of your questions is basically where are you setting master attenuation.

If do pay attention to your levels (don't run in the orange / red) then you can set all these to 0dB and play away fine.

Bitrate of files does make a huge difference particularly when amplified - you should always strive for 320kb files at a minimum.

Gavin 0 票
コメントアクション パーマリンク
0
Avatar

Hey djjoebunn,

Not sure if you finally tweaked your Bose L1MII+B2 system to your satisfaction, but I just picked up a pair of these myself and here are my settings:

  1. I don't have a DDJ but on my DJM-5000 (which is my wedding gig mixer and that's what I'm going to be using these L1s for primarily) is set at 0 dB on both master and zone outputs. No need to even push past 0 dB on the master LEDs.
  2. The trim on my Bose power stand sits at 12 o'clock during "show level" but I start the evening at the 9 o'clock position so that I don't  risk a high noise floor when playing soft music for dinner, etc.
  3. N/A since I don't use Itch.

I just posted my impressions of the Bose L1 Model II with B2 sub (I have 2 sets) on the Bose L1 forum at the URL below. In a nutshell, the B2s are somewhat lacking in the <80Hz frequency range so I'm using them with my JBL-PRX618XLF subs for the bigger weddings, or even adding the PRX635 tops for super-huge events leaving the Bose L1s to cover the back corners in a 4-point system configuration...

http://bose.infopop.cc/eve/forums/a/tpc/f/867107664/m/5390049366

 

E

 

Eychenne Everyday 0 票
コメントアクション パーマリンク