@cezar > Do you have the same issues since updating to the latest firmware?
Pioneer R1 TrackNext vs Browse
I have notices wired behaviour, on my R1 (1.06)
Prepare few tunes with one or more HOT-Cues
Browse library BY-PLAYLIST pick first song - it loads and AUTOMATICALLY loads HOT-CUES (pretty quick in 1.06 - wow!)
By using NEXT button (next song) R1 will load next song but WILL NOT load HOT-CUES
This inconsistent behaviour led me to accidentally remove few important Hot-Cues already . When you count on your hardware - sometimes you do thing quickly assuming your HOT-CUE is there - but oops - you have just deleted it !!! :(
please confirm you have the same issue
@cezar > Any update?
This little issue is still there 1.0.7. Making quick operation between the track unsure and causing mistakes.
It not the biggest issue - my unit still crashing with bzzzzzz noise and HotCue+Filter together does not work .
Any plans for next update?
1.08 - you have taken out this useful function. The hot-cues are NOT loading automatically. Neither when press NEXT not using the jog dial. uuuuu.
BUT - at least its consistent.
BUT - when I pressed CALL button to load my hot cue, and pressed A - I had 2 sec gap! - TERRIBLE. It was on my NewYear gig.
I am going to return my unit.
you do know you have to enable "hot cue auto load" in RB per track right? If you don't enable it for the track the cues will not load automatically
and yes, using the track next button will NOT auto load hot cues either way, it's the same on the 2000's. This is a feature I am glad is this way, imagine if you wanted to track next to listen quick to 3 or 4 songs in a row, it would be pretty annoying if i had to wait for every cue to load when all i want to do is quick track next through tracks
Thanks for the advice with RB AutoCue. I didn't know that , there is so many weird issues with my R1, I did not look into the RB carefully.
Anyway - i have 2s gap between HOTCUE press and sound
hot cue meaning "ABC"? If so, that is related to the auto load that has to be set on the track in RB. For each track "HOT CUE" must be checked for it to auto load them in the R1. If everything is set properly, you should not have a delay when pressing A B or C
in RB, add the column for HOT CUE like in the pic I attached and make sure there is a check mark for tracks you want to auto load
there is also a setting in preferences for it to be turned on by default on future tracks added to RB.
also make sure when you eject it creates the library for the R!