正式なコメント

@Toma > You should update the firmware to 2.10:
Ver.2.10 (10 March, 2016 Update)
[FIXED]
Certain controls on the XDJ-RX did not work when using rekordbox dj.
Hello everyone, I have a small problem between my XDJ -RX (2.0) and rekordbox DJ performance mode. If I manage to navigate well , loading tracks and operate the bass, mid and treble knobs, however I have no light on the XDJ-RX on the jogs, the play / pause and cue buttons. I also can't play with the effects of XDJ -RX ( filter , gate etc ...). Is this a known problem and if so do you have a solution? ( The Pulse Master may have the answer but I 'm listening to everybody eh ;))
ps : sorry for my English but I'm French and try to do my best. Thanks in advance. Thomas
@Toma > You should update the firmware to 2.10:
Ver.2.10 (10 March, 2016 Update)
[FIXED]
Certain controls on the XDJ-RX did not work when using rekordbox dj.
サインインしてコメントを残してください。
@Toma Marbotte : First download the latest firmware for xdj rx from here http://www.pioneerdj.com/en/support/software/xdj-rx/#firmware-update
then watch this https://www.youtube.com/watch?v=DOEQh9mTppk see if this might help u
also see this video just in case u don't know how to upgrade your firmware https://www.youtube.com/watch?v=04vVBcb5Baw
@DJ Hairless :
Thanks for your response but unfortunately I've already did that and watched those videos...I tried again..but it still doesn't work.
@Pulse > Tank you but that's what I've already done before asking here. Are we sure that this firmware fix those problems on Mac......?
Could you please verify your firmware version and shoot a video to show exactly what is happening?
My firmware version is 2.10.
The main problem is when I connect the XDJ-RX with Rekordbok DJ PERFORMANCE MODE (USB Cable), it works but I don't have lights on deck 1 & 2 on : Jogs, Cue button, Play/Pause Button. I also can't use the color FX (filter etc....).
I can shot a video if you want but it gonna show you those problems ;) (and it's early in the morning in France and my wife i still sleeping ;)).
Many thanks for your help...
Here is the video of my problem ==> https://youtu.be/_mTQH64nHog
@Toma > Thanks for the video - that does help, and your English is very good. ;)
Can you please go into rekordbox and verify the version you are running? The latest is 4.1.2.
The next thing I'd like you to do is click the MIDI button in rekordbox, then click the DEFAULT button at the top right. You may be asked if you want to confirm the reset to defaults, and prompted to save the changes, you can do so if you'd like but I doubt you've customized anything. Once it's been reset, try restarting rekordbox and see if it works as expected. If not, we may need to remove / reset the MIDI device - but let's try this first and I'll give you instructions for that next if needed.
@Pulse > Rekordox firmware is 4.1.2.
If I follow your advice, my XDJ-RX doesn't appear in the rekordbox midi section...So I can't reset to defaults...
I also followed your video about "how to configure Midi" on my Mac...It doesn't sounds good for me ;)))
Pfiouuuuu (French disappointment).
@Toma > Can you see if the XDJ-RX appears at the bottom of the rekordbox preferences > Audio page in the Control Device Information section?
If it's not there, can you see if the XDJ-RX shows up Mac Audio MIDI Setup application? You should have the RX in MIDI mode for both decks, and you'll see this:
If the XDJ-RX shows up white, as above, that means the system recognizes it.
On the MIDI configuration video, did you create the new MIDI profile and re-scan it to find the XDJ-RX? The reason this is needed is the old profile had a certain MIDI configuration, but the new firmware changed the MIDI data and HID communication, so it needed to be re-scanned.
The next thing you can do is click the Test Setup button at the top of the window, then click the down-pointing triangle to test SENDING MIDI data to the RX. You should see lights on the unit illuminate and change every time you click that triangle.
You can also try pressing buttons on the RX and the up-pointing triangle will illuminate every time you use a control (except for the mixer section).
Let me know how that works out for you.
@Pulse > You're a genius !!! Ok it works at 99% now ;)
I had to re-scan my xdj-rx in the midi control center and now my old problems are fixed. That's cool !
Last question because I have a new problem with my headphones. The sound inside is saturate and when I control knobs (bass, treble etc...) or FX, there's nothing in my headphones...Only dirty sound, as if the mixer section didn't go out in my headphones..Any idea ?
Thanks again for your help !!!
Oh man...in fact saturation is everywhere !!! also in my monitors....
Well...it seems to be occasional because it works again after on/off ;)
What is the audio buffer setting for your RX within rekordbox preferences?