I just can't get a looooad of my tracks to load in the XDJ-RR. I get the E-8305 error. I've tried exporting the files out of Audition and Audacity with different output settings, but I still have the same error. I even tried WavFix, and all the files showed up green, like there were no issues, but yeah, still won't play.
I've tried various USB's, reformatted them etc, still nothing.
Any help? I'm pretty close to sending this unit back.
Cheers.
サインインしてコメントを残してください。
The E-8305 error on Pioneer DJ XDJ-RR usually means the track format isn’t supported. Make sure your files are exported as 44.1 kHz / 16-bit or 24-bit WAV, AIFF, MP3, or AAC, then re-export them through Rekordbox to the USB. Files exported directly from editors sometimes won’t load. When I play space waves, I avoid panicking when the speed increases. Staying relaxed helps me react faster.
I had a similar issue with my Pioneer XDJ-RR not recognizing USB drives. In my case, the problem was the USB format. After reformatting the drive to FAT32 and exporting the tracks again through Rekordbox, the device started recognizing it properly roller baller. It might also help to try another USB stick or check if the firmware is up to date.
I ended up selling the unit. Just aggravated me with all the fixes needed.
I'm also working on it. Hopefully, new features will be released soon.
Beim XDJ-RR musst du den Lautsprecher über Master 1 (RCA) anschließen, da Master 2 (TRS) nur für Profi-Equipment gedacht ist. Nutze also ein RCA-auf-3,5 mm-Kabel in den AUX-Eingang der Box, wähle dort den AUX-Modus und dreh den Master-Level-Regler am Controller hoch.