Delay of control

The RB-DMX1 has about a 3 second delay between what the song and commands appear to do compared to when the lights are actually triggered. What could be wrong? For example, a color may show to change on the screen and then it takes a few seconds for the light to actually change. This happens on all my lights including LED par lights as well as moving heads.

Michael Sullivan 2018年04月15日 17:47 完了

投稿コメントは受け付けていません。

日付投票

2件のコメント

Try adjusting the delay compensation in the lighting preferences to see if that makes a difference, but you'll only get 1/2 a second of adjustment:

You might check that your lighting fixtures don't have a lighting curve set; some of them will allow you to make an adjustment to force a "fade" between colour changes depending on the application - you want to make sure this is not set on each light.

Any other delay could be attributed to your computer's specs or possibly other applications / tasks taking system resources or causing traffic to delay signal on the USB output.

Pulse 2018年04月15日 22:36 0 票

I was having this same issue, appears to have been a bottleneck at the USB port. Was running an external hard drive, DDJ-SX, and RB-DMX1 through a USB3.0 hub. Moving the RB-DMX1 to its own dedicated USB port on my computer solved the problem.

Hope this helps!

Wyatt Wukie 2018年04月25日 19:26 0 票