Problems with vinyl ripping

I tried to rip my vinyl and it worked fine with an EP but all my LP got ripped in double speed. I tried to find some fixes online but couldn't find anything.

Florian Steinberger 2020年04月13日 16:15 回答済み

正式なコメント

Check that the samplerate you were recording at and the playback rate of your recording are at the same values. If you recorded at 48kHz and play back at 96kHz, it would play double-speed.

Pulse 2020年04月13日 19:25

投稿コメントは受け付けていません。

日付投票

13件のコメント

Thank you for your quick answer but I'm a total beginner with that. Could you please go a little bit more into detail how to check that? If you want I send you pictures of my settings if that helps.

many thanks in advance

Florian Steinberger 2020年04月13日 21:50 0 票

Let's start with the basics... what software are you using to record into?

Pulse 2020年04月13日 23:46 0 票

I use rekordbox 5 with the latest update and a plx-500 for recording.

Florian Steinberger 2020年04月14日 02:36 0 票

Is it usual that the first couple answers come quick and than no more at all?

Florian Steinberger 2020年04月16日 11:36 0 票

When we launch new software and the forums get flooded, yes.

So with the PLX connected to rekordbox, go into the audio preferences, check that the PLX is selected, and see what is set for the sample rate.

Pulse 2020年04月16日 17:47 0 票

Sorry i was a bit frustrated because I'm too stupid to figure it out by myself.

The sample rate is at 44,1 khz i only can choose that. Should there be more options?

Is there maybe any driver for the PLX?

Florian Steinberger 2020年04月16日 23:33 0 票

Okay, that is correct. Was it within rekordbox that you were trying to play it back and it was double-speed?

Pulse 2020年04月16日 23:55 0 票

Yes in rekordbox and i also tried it with the windows media player.

It seem that the timer next to the record button is halfspeeded when i record vinyl so it makes of two seconds one.

Florian Steinberger 2020年04月17日 18:22 0 票

Really? That's bizarre. I'm going to escalate this to a ticket; check your email for more info.

Pulse 2020年04月17日 21:08 0 票

Didn't get an email yet. Is a video of my problem helpful?

Florian Steinberger 2020年04月22日 13:02 0 票

@Florian > Please try the following:

Remove the USB cable connecting PLX-500 and your computer.
Open [Control Panel] > [Hardware and sound] > [Sound].
From the [Sound] tab, select the device selected as [Default Device] and click [Properties].
From [Advanced] > [Default Format], check the sample rate in 「XXXXX Hz」 and close the [Properties] window.
Plug the USB cable back to your computer and connect it to PLX-500.
From [Sound] window > [Recording], select [Line USB AUDIO CODEC] and click [Properties].
Click [Advanced] > [Default Format] and select the same sample rate value [XXXXX Hz] as you checked in the above ④. Then, click [OK] and close the window.
Please make sure not to select anything which includes [1 channel].
Close the [Sound] window and record the playback on rekordbox.

Please let me know if that resolves the issue.

Pulse 2020年04月22日 15:58 0 票

Thank you very much that fixed my problem.

Florian Steinberger 2020年04月22日 18:45 0 票