Have a feature request or suggestion? Post your idea here!

投稿

3フォロワー フォローする
0
Avatar

CDJ2000 NXS2 does not start

Hi there, 

we were changing the LAN connector on the mainboard.

When we are trying to turning the CDJ on, the CDJ is going into a freeze mode. Can you help us?

Mike Lite

正式なコメント

Avatar

Sorry nothing we can do from here, you would need a service center to check it out, please file an inquiry ticket here and our support team will gather some additional information to assist you in resolving this issue.

Jay
コメントアクション Permalink

サインインしてコメントを残してください。

2件のコメント

0
Avatar

Hi,

do I understand correctly you *soldered* on the mainboard, now the unit is not working anymore?

I would say you screwed it up :-)

So either you made a mistake when re-assembling the unit (e.g. some cables not fitted correctly) or you made a mistake while soldering (e.g. shorting something).

You have to bring your unit to someone who can fix it properly. If you are lucky your unit can be saved without further replacing parts, if your are unlucky you may have now destroyed more as before :-(

If you have the *knowlegde* and *equipment* to do proper repair, get the service manual and troubleshoot the problem. Disassemble again. Reinspect the area on the mainboard where you soldered if you damaged something. With mainboard being disconnected from everything check if there is any short on any of the power supply rails. Reassemble with double checking all the connections.

Markus Marquardt 0 票
コメントアクション Permalink