Hi,
I'm not sure if this is the proper way to request such change but in the previous post here:
https://forums.pioneerdj.com/hc/en-us/community/posts/4408265100057-Lighting-Fixture-Request-Xiang-Yi-Lighting-STL1003-Moving-Laser-Heads
The way the fixture was done perfectly reflected the DMX channels but does not allow me to reassign it to other Fixture roles because of Channel 1 being assigned as a Pan Rotation. Consequently, when assigned as an Effect 1, Effect 2 or Laser role, the moving head spins non stop on the Pan axis.
By having the Tilt/Pan channels mapped independently, I'll be able to create a more wide array of alternative use of these moving heads (which are an hybrid between spot moving heads and lasers).
Thank you so much!
Here is the fixture update request:
Fixture1:
Manufacturer: Generic
Name: Generic Moving Laser 8bit
Type : Moving Head
DMX mapping:
| Aisle/Channel ID |
Range of variables |
Description |
| CH1 |
0 |
255 |
X-Axis position control ; Equivalent to Pan 8bit |
| CH2 |
0 |
255 |
Y-Axis position control ; Equivalent to Tilt 8bit |
Fixture2:
Manufacturer: Unknown
Name: STL1003 Laser
Type : Moving Head
DMX mapping:
| Aisle/Channel ID |
Range of variables |
Description |
| CH1 |
0 |
255 |
Pattern control ; Doesn't do anything can be used as dummy channel |
| CH2 |
0 |
255 |
Motor speed control, from fast to slow |
| CH3 |
0 |
255 |
Total dimming/laser intensity |
| CH4 |
0 |
255 |
Red color |
| CH5 |
0 |
255 |
Green color |
| CH6 |
0 |
255 |
Blue color |
| CH7 |
0 |
0 |
Strobe off |
| 1 |
255 |
Strobe from slow to fast |
| CH8 |
0 |
50 |
Channel 1 to 10 are valid |
| 51 |
100 |
Self-propelled mode 1 |
| 101 |
150 |
Self-propelled mode 2 |
| 151 |
200 |
Voice control mode 1 |
| 201 |
255 |
Voice control mode 1 |
| CH9 |
0 |
255 |
Speed corresponding to the self-propelled mode |
| CH10 |
0 |
199 |
No effects; it's just to control channel 1 to 9 |
| 200 |
255 |
Reset the device for 5 seconds |
Thank you so much for the amazing product support.
Frank
