Rmx connection prob

So my new rmx send and return works fine. But the on/of bleu button on top of my djm900nx2 does not light up. So i don't have any sound of my rmx coming out of my master. Everything is installed the way i should be, also everything is connecties with USB to my laptop. Do i have to make a change in the settings of rekordbox or what could be the problem here? Can you help me out here pls? Thank you

Seb Paques 2022年02月15日 15:25

投稿コメントは受け付けていません。

日付投票

9件のコメント

Do you have the RETURN type set as AUX or INSERT?

Pulse 2022年02月15日 19:06 0 票

As insert. When i put it in aux the input and output recieves no signal anymore.

Seb Paques 2022年02月15日 19:27 0 票

Are you wired correctly for the audio in/out?

Pulse 2022年02月15日 23:45 0 票

Everything is connected correctly. I once pulled out the USB of the rmx-1000 and then the blue LED lamp button on the top right of the djm900nx2 lights up briefly. So apparently the rmx-1000 is recognized by the djm900nx2 but I can't turn it on and off as the button lighting is not lit, only when unplugging and plugging in the usb of the rmx-1000

Seb Paques 2022年02月16日 13:55 0 票

Wait... you have the USB connected to the RMX? You don't need that - use the audio connections only.

Pulse 2022年02月16日 23:57 0 票

I had connected the usb to a usb hub to the laptop. So not the USB connected to the USB input at the top right of the djm900nx2. But breaking this connection has no effect. The blue light at the top right remains off. When I switch the rmx off and on, the light on the top right of the djm lights up blue for a while. But it goes out again. So I can't turn it on anyway.

Seb Paques 2022年02月17日 07:48 0 票

Seb, just to confirm - the connections for the send/return (audio) should be connected properly, and then when you select a source under the beat FX section, and have the S/R set to RETURN, it should allow you to route the audio through the RMX.

Pulse 2022年02月20日 00:56 0 票

I have connected the jack cables correctly. On the djm I selected 1/4 jack and insert at the top right. On the djm900nx2, you cannot select the send/return source below the beat fx. The rmx LED bars input and output indicate that music is being sent in and out. On Djm900nx2, the blue LED in the on-off button at the top right does not light up. That's why I can't turn it on. So no sound can come out of the master from the rmx.

Seb Paques 2022年02月20日 14:51 0 票

It was a problem with the device. This has been in for repair. It was a new device, so I assumed the problem had to be something else.
Device repaired free of charge under warranty.
Problem solved. Topic closed!

Seb Paques 2023年07月16日 16:56 0 票