Performance Mode - Enable PRO DJ Link Syncing

Hello,

I'm using the following Pioneer gear :
-XDJ-XZ Controller 
-DDJ-XP2 Controller
-DJS-1000 Sampler
-RB-DMX1 Module
-Tidal Hifi Plus Subscription
-Beatport Subscription
-RekordBox Creative Subscription

What I wanna use :
-The 4 decks of my 4 decks controller (!)
-The pads of my DDJ-XP2, including customization
-The beatsync between DJS-1000 sampler and XDJ-XZ Controller
-Stream my music through Tidal & Beatport

No mather how the setup is made, there is always a problem.
And that's really frustrating, especially with only Pioneer supported hardware/software.

I tried 3 different setups :

Setup 1 : RekordBox in Performance mode

Problems : 
-Syncing between is DJS1000 and RekordBox is impossible over Pro DJ Link
-There is no function to autosync the DJS-1000 based on the input signal

Setup 2 : RekordBox in Export mode 

Pro :
-BeatSync works (PRO DJ Link)

Problems : 
-I have no access to Tidal & Beatport
-The decks 3 & 4 are not usable with Rekorbox
-My DDJ-XP2 is not working anymore
-I cannot control lighting through RB-DMX1

Setup 3 : Stand Alone USB Mode

Pro : 
-BeatSync works (PRO DJ Link)

Problems : 
-I have no access to Tidal & Beatport
-The decks 3 & 4 are not usable with Rekorbox
-My DDJ-XP2 is not working anymore
-I cannot control lighting through RB-DMX1

This is so annoying. I already made a thread here and had no response from Pioneer : https://forums.pioneerdj.com/hc/en-us/community/posts/4668774338457-Beat-Sync-in-Performance-mode-with-ProDJ-Link-USB

I tried also to download the PRO DJ Link Bridge.
Everything is detected like it should and syncs correctly.
But as soon I go in Performance mode, the XDJ-XZ disconnects from Pro DJ Link. I tried also the Ableton Link solution : not bad at all, but comes with other problems : I have to use Ableton Live in combination with Rekordbox and this disables the Tempo sliders of my XZ... come on!

Yes I know : BeatSync is not relevant for most DJ's, I don't use it too. (only the BPM Sync). The reason I want it absolutely is that I mapped MIDI controls of the DJS-1000 to play patterns on my laser system.

This comes with other typical Pioneer compatibility issues : the DDJ-XP2 is not recognized by the XDJ-XZ. (you need a CDJ-2000 at least).
And even if it worked, there would be no possibility to customize the pads, which makes it ... useless.

What could possibly fix this : 
-Enable BeatSync over ProDJLink in Performance mode (I'm not the only one asking for that!)
-Add a MIDI out from RekordBox that can be used by any MIDI device. Serato and others have this for years now...

I was considering a set of CDJ-3000's with a DJM-V10, but I don't know if they can stream Tidal without any computer connection. (?)
And if they would... it means I will not be able to control my lights anymore. 

I searched almost for every solution, read all the details of the documentation, studied how PRO DJ Link works, tried a lot of 3rd party solutions and I could only conclude that this is just impossible so far.

It's only firmware/software issue so I hope there will ever be an update. (but I've read people asking for that ... 5 years ago and still no solution...)

Any advice, Pioneer, pease?