I should add I also tried connecting the working turntable to the channel the non-working table was connected to and it worked fine, so it doesn't appear to be an issue with the mixer/channel either.
DVS and PLX-1000 Issue
Trying to setup Rekordbox 6 DVS with my DJM 750 MKII and my two PLX-1000 tables. One table works fine, the other shows a straight horizontal line on the calibration screen and any loaded track appears to try and play in reverse.
I read about switching around the R and L cables, even if they appear connected correctly. I tried all 4 possible combinations of the cable between mixer and table and no luck.
I also thought maybe it was just the cable itself, so I switch cables between the working table and the non-working table and nothing changes. The turntable that was working continues to work and the other does not.
This makes me think it is an issue with the turntable. Is there a way to verify and what would my next steps be?
Found another thread where someone suggested checking the cartridge/stylus. I took that apart, cleaned it out, replaced it, and now the signal appears to be going through properly!
Was going to say, the stylus can get dirty and cause this. Glad you got it worked out!