投稿コメントは受け付けていません。
Hey Soul Fabulous,
Are you connecting the XZ with an ethernet adapter or are you just using USB? If USB, have you also installed the USB link export drivers?
You should also check the firewall to ensure it's disabled (for testing) to allow the communication.
did all you have suggested and it still doesn't work. Also login into account here on the site is stuck in a loop on Safari.
Obviously, something has changed drastically between RB5 & RB6 that is causing this problem and there is no way in hell I'm going to keep to 2 different libraries updated.
P.S. - I'm running a 2019 MBP 15".
Re: the forum issue, please ensure that you clear the cookies for:
*.pioneerdj.com
*.rekordbox.com
*.zendesk.com
*.gigya.com
...and then verify that you allow cross-site content for those domains.
rekordbox 5 and 6 both work using the same protocols and systems, but as they're different applications, you may need to ensure they're allowed through the firewall. You may also try disabling WiFi for testing.
Hi, I always turn off WiFi when using Export Link There just seems to be a hiccup in RB6 or magnet the firmware update. I can make a vid and provide a link. Also they’re some features that are different between the RX2 & XZ.
Just to loop back -- did you ever install the USB link export drivers, and made sure the installation was allowed through the macOS security?
I just verified it's working with rekordbox 6.0.4 (don't have 6.0.3 installed any more).
Check and see that this device appears in your network:
I'm now on 6.04 and USB Link Drivers are installed and still not working!
Can you open the System Information app, then click Software > Disabled Software and tell me if there's anything listed on the right?
nothing listed
And does the USB 10/100 LAN item appear in the network list?
Under USB, There seems to be 2 XDJ-XZ one with version 1.14 & the other with version 1.10 firmware.
for locations yes!
Here are 2 more showing the firmware versions of the XDJ-XZ.
This so Frustrating! I completely reinstalled my OS and RB6 with all drivers and USBLINK driver and still a no go. Now I have to install RB5 and have 2 libraries to contend with.
I have a gig in 3 weeks and I use my laptop has a failsafe. This is a no go with RB6!
Hi, any solution to the problem I’m having?
Hi I would like to bump this as I am having a similar issue.
I started my own thread here:
