Connections for rekordbox dj Performance

A bit of advise;

I have NXS2 setup. CDJs and mixer connected to LAN hub which is connected to Mac.
Mixer also connected to Mac via USB.

What other connection do I need to use Performance mode?

I'd want to still have my red on air jog lights and want my CDJs routed to channels 2 and 3.

Shªun_N 3 de Outubro de 2017 20:16 Respondido

Comentário oficial

First, for using the CDJs as HID controllers in PERFORMANCE mode, link them to each-other and the DJM via ethernet, and you can use the LINK EXPORT tool to bridge the USB > ethernet so only one device has to be connected via USB - typically this would be the DJM as it's being used as the audio interface. (It's really a genius configuration if you ask me!)

What won't work is "on-air" as that's not supported in PERFORMANCE mode regardless of the configuration.

Pulse 6 de Outubro de 2017 17:20

Publicação fechada para comentários.

Data Votos

6 comentários

Is it not possible to adjust the beat grid from the CDJs when in Performance mode?

Shªun_N 10 de Outubro de 2017 18:09 0 votos

Not using the CDJ itself in HID mode, no.

Pulse 10 de Outubro de 2017 20:09 0 votos

Is this still a limitation?

I'd love to use Performance mode but also use my CDJs to physically adjust the grid.

Shªun_N 23 de Março de 2020 08:34 0 votos

I haven't tried this in a while but I know it's available on the XZ, so it may now be available on the CDJ-2000NXS2's, I'll have to test it.

Pulse 23 de Março de 2020 16:52 0 votos

Would appreciate it if you could.

Would this to be available now :)

Shªun_N 23 de Março de 2020 17:03 0 votos