How to connect DJM 2000NXS & CDJ 2000NXS's HID in RekordboxDJ

After trial and error I finally figured out how to connect my DJM 2000nxs & 2 CDJ2000nxs via HID in RekordboxDJ (Performance Mode). After all drivers were installed... I connected all 3 to my laptop via usb cables. Powered up the mixer and CDJs then open RekordboxDj. In Rekordbox, go into "Preferences" then the "Audio" tab. In the audio drop-down select "DJM 2000 ASIO" then scroll down to "Output Channels". This is the part that was confusing. On the DJM 2000nxs mixer at the top of the channels I am using I had to change the selector switch to "USB3/4 for channel 2 & USB5/6 for channel 3". Now, back to RekordboxDj under "Output Channels", Output Deck 1 (left) select DJM-2000 USB3, then DJM-2000 USB4 for the (right). For Output Deck 2 (left) select DJM-2000 USB5, then DJM-2000 USB6 for the (right). To link the CDJs... Press the "Link" button, you should see "Control Mode & DJM-2000" select "Control Mode" then press selector again to connect. Select the Deck #. This number reflects the decks in RekordboxDj, not the channel number on the mixer. The key is making sure the Deck Output channels match the USB#s on the channels used on the mixer. Hope this helps.

DJ Bass V 2 de Outubro de 2015 07:12

Comentário oficial

FWIW, I've been testing the v4 software for quite some time and it's really come far since the first beta. There are some users having latency and connection issues, and I recognize that part of that has to do with their computer or configuration as other users with identical hardware are not having the same problems.

Pioneer is working to address the issues and complaints users are reporting, but simply bailing out of the software won't help us improve it. If you are having a problem, please first check the FAQs and if there's no solution, submit an inquiry, we'll be happy to help you solve the problem and improve the software for all users.

Thanks for your patience!

Pulse 2 de Outubro de 2015 17:57

Publicação fechada para comentários.

Data Votos

10 comentários

Thanks for the heads up. When I'm filthy rich I'll try to remember your post ;)

Yves Smolders 2 de Outubro de 2015 10:07 0 votos

can we control with Midi the DJM 2000 in Rekordbox DJ ? It doesn't seem to work for me
Thanx !

PoDeZebi 2 de Outubro de 2015 10:12 0 votos

-1

Thats a helpful post thanks for sharing. How are you finding it to use? Is there any lag and whats the display like on the cdj when its in HID mode?

djsd 2 de Outubro de 2015 11:10 -1 votos

No wavform for me on my CDJ2000 Nexus...

PoDeZebi 2 de Outubro de 2015 11:18 0 votos

Connected 2 CDJ-2000nxs (sw2.4) and a djm-900nxs. No HID on my cdi's.. :-(

Angelo W. Rassin 2 de Outubro de 2015 12:29 1 voto

With my CDJ-2000 (not nexus) And DJM-2000 (not nexus) the CDj's working fine in HID mode here :) (2channels) ,but when i try to connect my DJJ-SZ for 2 extra decks on my DJM-2000 mixer the software crashes.

Philip Heireman (Dj Smoke) 2 de Outubro de 2015 17:13 0 votos

For now I am staying with Rekordbox 3.3.0. It is very reliable and never crashes. I have over 30 crashes report logs for 4.0. With 4.0 I found the latency response to be very slow, the waveforms take a long time to catch up or would not display at all. This was in both export and performance mode. Even loading a track to a deck causes it to hang up and crash. I do like the FX section though but until a DDJ-SP1 is created to support rekordboxdj, you can't get the full potential using CDJs. But with all that said, rekordboxdj is in it's infant stages and there's always bugs to work out. I'm a diehard Pioneer/Rekordbox fan and I'm certain Pioneer will work the bugs out.

DJ Bass V 2 de Outubro de 2015 17:39 0 votos

Pulse, I didn't mean to sound as if I've completely given up on RB 4.0 because I haven't. I just can't use it for live performances until it's reliable on my computer. I will work with Pioneer by submitting inquiries once I've really tested the software.

DJ Bass V 2 de Outubro de 2015 19:40 0 votos

@PoDeZebi > No, there is no MIDI control at this time.

Pulse 3 de Outubro de 2015 01:32 0 votos