DJM-900NXS vs DJM-900NXS2 EQ setting

? do you mean on the EQ settings for the beat effects?

No this setting is located in Settings > Controller > Mixer > EQ > EQ Type.  There are two options DJM-900NXS and DJM-900NXS2

I should probably add that this is with a DDJ-RZX.

I believe it's the slope but will get a better answer shortly for you.

Thanks for checking into this Jay!

I looked in the manual and did not see any information so this might be helpful for others until it lands in the manual.

The NXS2 EQ is more tightly focused. So when you select "EQ" vs "ISOLATOR" then you take out the bass for example, on the regular 900 it takes out a lot of the mids so you're left with a bit of mid range and high end.  With the NXS2, when you take out the bass, for example, it just drops out the low end, sounds like about 200Hz and down so mid range is preserved.  Of course if you use the ISOLATE setting, it doesn't do anything.

From the PionerDJ site:

"Use the improved EQ to balance the high, mid, and low frequencies on every channel. Choose your preferred channel fader curve pattern for the perfect mix."

Sounds good.  Once I get my answer I will post any differences from the above answer.

So 2 years have gona and still no answer? =O

Fire.

The difference is fire.

Sorry, I don't have that information available - not sure if Jay ever got it?