sync mode

I guess and as I read in the forum to other users, Sync mode, it does not work
I like to use Sync mode for loop outputs, backspin etc ... and to follow both tracks in the beat, without having to correct them with the bend

I have XDJ RX2 and the Sync Mode does not work as expected.

It is difficult to explain the specific cases, there are several, but I will try.

Charge one item on deck1, and another on another BPM on deck 2 (it can be a loop)
You have to press the two sync buttons until they are fixed (without blinking and this option should continue like that until you)
and they stay synchronized, if you press play, you enter the beat, even if you press erroneously (in the middle beat)
When you hit bend, scrach, backspin or hot cue, half loop, etc ... you should continue to beat both themes, and it is not like that, it is disabled.
You can do several tests and observe that it does not work correctly, in several ways, which I explain is part of the errors.

Also when we change pitch, we see an error, I think it's important.
when the tempo difference is large, it warns us that we must pass the master tempo by reset, to continue and adjust both pitch, and almost always you pass accidentally and affects the other deck in deceleration or acceleration

The normal would be like in other systems, surpassing the point of the picth without affecting the other pitch
I do not know if I explained it correctly, or should I upload a video?

Thanks and best regards

Ren3martin 26 de Fevereiro de 2018 16:33

Publicação fechada para comentários.

Data Votos

3 comentários

As soon as you backspin, you're taking the track OUT of sync. How would it know where to sync when your backspin timing might not be quite on the beat? The BPMs are still in sync - if you want it to snap back, press the SYNC button again. This is perfectly normal.

Pulse 27 de Fevereiro de 2018 00:24 0 votos

No, it's not normal!

If you press the sync button, when it desynchronizes if you touch lightly the side or center of the Jog ... the button remains blinking (and it is normal because there is no sync in beat).

So if you press sync, as you say, it does not sync and appears on the screen: "sync disconnected".

You have to press again a second time to return the sync mode to beat.

Also if two tracks are synchronized and canceled manually, you should be disconnecting the sync, not touching the pich bend or the inside of the jog.

And two clicks to sync, should not be correct, (one click if) please talk to your engineers to try to fix it in future updates, I think it is a major flaw.

And also that you can cancel the sync by playing the bend, you should follow both tracks in beat and vary together and work with an auxiliary cdj for example to three tracks

Thank you

Ren3martin 28 de Fevereiro de 2018 01:16 0 votos

Tan pronto como vuelve, la pista NO está sincronizada. ¿Cómo sabría dónde sincronizar cuando el tiempo de retroceso podría no seguir el ritmo? Los BPM aún están sincronizados; Si desea que se ajusten, presione el botón SYNC nuevamente. Esto es perfectamente normal.

NO, NO ES NORMAL

Es fácil de contestar, debe sincronizar IN THE BEAT, para eso están las marcas de ritmo ofrecidas por la cuantización y la cuadrícula, debe seguir ambas canciones mientras se presiona la sincronización. El tono no se mueve en una canción si las dos son lo mismo, van juntas, si mueves una, las dos canciones se mueven. El ritmo o golpe donde está la cuadrícula si muevo un jog, o hago un backspin, debe ser al cuadrado en el momento de continuar con la canción, en el mejor tiempo, es decir en el tiempo más cercano. Funciona con todos los programas, incluido rekordbox, pero no funciona en el modo autónomo,

Ren3martin 7 de Abril de 2018 18:03 0 votos