when he increases in the parent company, he goes down alone and comes back halfway LOOK
https://www.youtube.com/watch?v=qagQwBeFXO4
SAME ERROR BUT ON RIGHT DECK
FIRMWARE DDJ-RB_v103-2.exe
WINDOWS 7 64 bits,
If you have found that the hardware itself is not transmitting the output MIDI signal, then it could be a fault with the hardware. Please contact Pioneer DJ technical support in your region to have your hardware inspected and/or serviced.
Publicação fechada para comentários.
Have you tried using this with another computer to verify that the issue is not related to the computer / installation?
Yes, the same thing happened. with notebook diferents, windows versions diferents
Out of curiosity, have you tried using a different USB cable?
If that has been tried, I'd like to ask you to use a MIDI monitor to see if the fader itself is sending signal to the computer. With the DDJ-RB selected as the source device, it should show activity in the MIDI INPUT window for the entire travel of the fader. If it does not, the issue is the hardware. If it does, the issue is the software or mapping.
good afternoon. I have the same problem with the right fader, it only goes up halfway, my controller is the pioneer ddj RZ. It was fine since I updated him and he gave me this scare. thank you very much for your help. regards
Same problem over here. I have tried to use a MIDI monitor and it does not show any sign of activity before reaching level 8 of my left channel fader.
It doesn't seem to me that pioneer has adressed this as a problem and it is very frustrating due to the fact that i play gigs in my local club every other day.
Pioneer , please, contact us as soon as possible.
Good vibes and Peace from italy!