@Enrico > What do you have set in the DJM-250MK2 Setting Utility for the channel outputs?
Ações de comentário
Publicação
Seguir
Plx500 + djm250mk2 + control vinyl RB-VD1-K
Hello,
I have a problem with the Djm250 Mk2 mixer connected to rekordbox dvs, the firmware and the mixer drivers, they are updated to the latest version, I performed all the recommended operations but the signal does not reach rekorbox.
My Vinyl Controls are RB-VD1-K, my operating system is Mac OS Mojave 10.14.4 my rekorbox is 5.4.3 (I didn't install the latest version because it gives me problems with graphics in the program)
I have a 21.5-inch iMac, Late 2009.
I leave the screenshots of all the settings I made.
I hope you can give me the right advice to solve the problem.
Publicação fechada para comentários.
Data
Votos
5 comentários
Hello. As your screenshot shows, my channel outputs are Control tone phono for both channels 1 and 2. But they’re active differently to yours.
All setings are ok but no signals coming from tuntables when playing.
Ações de comentário
Yours should show differently -- my mixer wasn't plugged-in when I took that screenshot. ;)
Can you switch them from PHONO to anything else, and then back to PHONO. Then on the DVS page in rekordbox, please click the AUTO button beside the SIZE slider?
Ações de comentário
It shows different! Mine are active! :)
I switched different times and press that AUTO button but no signal if i play the rekorbox vinyl.
Reboot system restart rekorbox. .. but no way out.
Turntables, headshel and mixerl work fine in PHONO with music records.
Ações de comentário
Hello,
I'm trying and trying again but no signal is coming to the rekordbox, the settings are all as described.
Ações de comentário