I require 2 stands for the CDJ 2000NXS2 like the ones for the CDJ 2000 that have now been discontinued. I need something like this as my set up is some what different, so most stands are no use. The type of stand that I require needs the plat to be able to pivot that the unit sits on also the main bar that holds it needs to be adjustable in height. the old ones did this but had a flat plat on the bottom this I was just going to cut off as the main bar will be fixed to a DJ system, any thoughts please.
Post ist für Kommentare geschlossen.
I have used these
http://www.guitarcenter.com/Sefour/CR030-Crane-Laptop-CD-Player-Stand.gc
Hi Dennis Brown
Thank you for taking the time to reply from what I can see these stands will fit where I need them too, just one more question.
The bottom part of the stand that bolts to the base plate, if you remove the base plate what are the sizes to the foot where the bolts go depending on the size of this will let me know if there is enough space to bolt this down where it needs to go.
Thank for all your help
Regards
Keith White
The bottom plate is made to attache to the base, (the bottom plate will fit under a turntable, mixer or whatever else you have or something heavy) I have mine this way.
The bolts are only long enough to screw into the base plate, (the rod that attaches to the base plate are only about 1' to 2 1/2 wide, maybe 3 inches, so there isn't a lot of room for error,
my advice, just use the the supplied base plate and it's bolts, and you should be fine.
Hi Dennis Brown
I have very similar needs to Keith White (he asked a question regarding CDJ 2000NXS2 stands back in 2016).
Do you still use your Selfor stands & if so, are you still satisfied with them?
Thanks for your time
Regards,
Jim Davis Jr