Offizieller Kommentar
Unfortunately, this is likely a hardware issue. Please contact your nearest authorized repair center.
Aktionen für Kommentare
Post
Folgen
Low volume 3rd channel only DJM900
About 4 hours into using my DJM900, all of the sudden the channel 3 volume turns into 1/3 the volume of the other channels. The lights appear the same in terms of gain.
My first instinct was that my CDJ went bad but after swapping channels, the problem still remains. It does not do this on channel 1 or 2 but channel 3 I simply can't get it to play volume correctly now.
Has anyone had this issue? I assume I am going to need to get it serviced?
Any help is appreciated!
Post ist für Kommentare geschlossen.
Datum
Stimmen
2 Kommentare
Please check your cross fader Settings, just to make sure you haven't assigned channel 3 to the cross fader and it is moving to the other side....
Before you laugh - I had this before and it took me a few minutes to realize that I changed the cross fader Settings by accident.
Aktionen für Kommentare