Hello
I bought a new DJM 900 NXS2 and have a problem to create a usb connection.
The following steps i did already.
If I plug in the usb cable, the LED on the mixer is blinking, but the Driver doesn't open automatically.
If I open the Driver under my programms it Shows that the usb cennoction doesn't works.
I try also with different usb cables.
What can I do now? Any recommendations?
Greetings Marcel
Post ist für Kommentare geschlossen.
Sometimes the LED will blink until the driver is assigned and used within an application. Have you tried loading a program and assigning outputs / sending signal?
If the device doesn't show, check the Audio MIDI Setup tool to see if the device is listed in both the MIDI and Audio windows.
Also, try the B port on the mixer if you haven't already.
Hi I have problem with my djm 900 nxs2. My USB Port B doesn't work. port A works fine but just today tried to plug to port B and the light on the port comes green ok but When I play music and turn source switch to port B no sound is coming in to the channel. Please help.
@Voytech > With the computer connected to the B port, open the DJM-900NXS2 Settings Utility app and see if it appears as connected there.
If not, please tell me if you're on a Mac or PC and I'll give you instructions on further troubleshooting.
Thank you for fast reply. I performed firmware update on the mixer to newest version and that resolved the problem. Both USB ports are now working. Thanks again for the support.
Awesome - thanks for trying that and writing back!