Setting up Toraiz to existing DJ set-up

Hi there,

After some advice please - I've just bought the Toraiz and would like it to fit into my existing set up as a sampler/sequencer to use over tracks etc (i.e. through the master channels).

My set up is two turntables, two CDJ2000, DJM2000 mixer and RMX1000 - any advice or ideas would be welcome.

Thanks

Steve

Steven Lannigan 15. Dezember 2017 09:36

Offizieller Kommentar

Hello Steve,

With the setup you currently have the best advice would be to connect the Toraiz via Ethernet along with your CDJ'S to your DJM-2000. This will allow beat syncing while playing from the CDJS. you would also need to connect the toraiz MASTER OUT to one of the DJM-2000 line inputs.

If you want to record samples into the toraiz from your CDJS or Turntables you can go out of the DJM send output (or Booth if your not using it) into the input of the toraiz to be able to record samples or loops into the toraiz.

Hopefully this helps..

Thanks

Dj Creme 18. Dezember 2017 23:20

Post ist für Kommentare geschlossen.

Datum Stimmen

2 Kommentare

(but with toraiz not in the grid)
in the grid only with DJS-1000 :-(

Rafa 8. Januar 2018 01:23 0 Stimmen