Hey guys, I have a New DJM 2000 Nexus mixer I got for xmas. I have always used channel 2 and 3 since I got it. But tonight I hooked up to more players to channel 1 and 4 and channel 4 had no output. Nothing out of the headphones, no meter moving, no nothing. I quickly thought it might be the RCA cables so I changed them out. Still same issue. I plugged the same cdj into channel 3 and it worked fine. But the "noise" effect has out put on channel 4. All switches are in proper position as well. Do I have a bad mixer? Or am I missing something?
Post ist für Kommentare geschlossen.
1) Check, if you are in the right input in the back and not in the Phono input
2) @ the inputs there is a little switch. It changes the RCA input to the digital input! Make sure, that it is chosen correctly! If you go by RCAs, it has to stand @ CD!
3) Check on top of the mixer that the switch is correct. It has to stand @ CD/Digital!
Hope, I can help.
Greez
Thanks Greez, I had checked all that already. cahnnel 4 works in digital, but not analog. it is very strange
sending it back on monday