Hey so I have a Pioneer DJM 900 Nexus and two CDJ 900's connected via usb hub to my computer which is running traktor. I'm having a problem with the FX on the mixer right now. I had this problem before but managed to temporarily fix it, basically I had to disable the build in FX on Traktor (delay, reverb, flanger, etc.) to be able to use the built in Pioneer FX. All of the sound colour FX work fine and the roll and reverse roll both work, except none of the others. Also, when I switch between channels for the FX to play through, there is dead noise, so if I was on master and switched to channel 1, every other channel that i switched to on the way to getting the knob to 1 would create dead air (no sound coming through out of the mixer) until i get to the channel that the track is currently playing on.
Please let me know if there's something that I should change to fix this problem or if its a problem with the hardware.
Thanks!
Post ist für Kommentare geschlossen.
By the way everything else is definitely hooked up properly, it is simply a problem with the FX. I'm using the default settings that are chosen when you hook up the Pioneer gear with the laptop.
@Alex > Have you tried just not connecting the DJM via USB...?
Yeah I have and the same problem persists, making me lean towards the side of it being a hardware problem unfortunately.. :/
@Alex > Yup, that's exactly what it sounds like. Please return the unit for a service.