Hi all,
I've just upgraded to the 850 from the 600 and cannot find the attenuator knob (or equivalent).
With music playing, the output (when trim levels are just on red) is always very high to listen to, but hardly any (if at all) impact on the LEDs on the Master.
Any and all help greatly appreciated.
Cheers,
Paul
Post ist für Kommentare geschlossen.
You can change the level of attenuation in the club setup menu.
It is explained on page 24 of the english user manual.
You have to hold the setup button while you turn the mixer on to get into the setup menu.
Hope this helps!
Thanks Tim.
Something does seem to have been lost in making it a set up change that can't be done on the fly.
I'm thinking when neighbours/police come to the door!
I'll have a look at the manual- thanks again,
Paul
@Paul > If the cops show up, consider using one of the 3 other methods of attenuating the volume of the signal:
1) the channel gain / trim
2) the channel fader
3) the master volume
Hope this helps you avoid fines! ;)