Ok so I have 2 cdj 350 and a xone 62 which I want to connect to my macbook pro over 2 usb cables. I have tried doing exactly the same method as on this video by djric, but with no luck.
http://www.youtube.com/watch?v=MtQwD2wyKKk
Current situation is as follows:
I have aggegrated the 2 cdj's as far as I'm aware and once connected to Traktor 2.5 I pick this as my audio device.
Within the output routing if its on internal mode I get sound but, as several other posts have mentioned both decks come through one channel etc, also play and cue buttons don't work etc, and no info on the displays.
Has anyone succeeded in doing this? If so can they provide a step-by-step guide to what settings are required and the order things need to be done etc.
many thanks
Post ist für Kommentare geschlossen.
@Tom > You need to configure the audio settings to be in EXTERNAL mixer mode, and have the Traktor decks output their signal on 0/1 and 2/3 (or 1/2, 3/4 depending on how it displays on your computer). If you haven't loaded the TSI file for the CDJ350, you'll need to do so. Don't forget to assign a different MIDI channel for each deck and you may need to customize the TSI to adjust for this.
Hi Pulse - thanks for this. I have loaded set up as external and output as above. I have loaded the tsi too. I am now getting sound in external mode. I now have sound in external mode. I have also gone into the utility to set deck B to midi channel 2. I now have functionality.
The problem is that deck A is playing through channel 2 on my mixer and vice versa.
Also I'm not getting any track info coming through on the cdj displays.
Appreciate your time on this - thanks
actually swapping channels was easy...its just display functionality I'm missing now on the cdjs.
thanks
the display mode on the CDJ does not work, because traktor hasnt wrote HID support for the CDJ350 into their software, the CDJ will only display
"control mode"
there is nothing you or pioneer can do about this as it is an issue that can only be sorted out by contacting nativie instruments and getting them to update the software with HID support, and good luck with that you will hav more chance extracting blood from a dry stone
I use a Mac.. and I follow your setup to the T... but I just have one problem... why does the scratch-ing doesn't work?... the jog only work for wiggle-ing the pitch!... not for SCRATCH-ing!!.. what should I do??... please reply thank you...
press one of the 3 buttons on the right side above the pitch. one of them enables/disables it.
Thx dreamseller .... Its dat easy... but I just stumbled into another problem... why if I connect the first CDJ its okay.. but the second cdj 350 (the channel 2) when I press connect mode on the CDJ my Traktor crashes...??... in windows they have buffers to increase.. is it on mac they don't have it? how to slve this problem??... thanks for the reply...
hi to all same set up traktor v2.1.2 usb hub belkin working fine but the sound is terrible noise etc...
anything to do with latency or midi audio setup?
Hi Guys i have the macbook book os x 10.7.4 and trying to connect 2 cdj 350 to it it's working fine in tracktor 2.5 as a controller ( pal, pause , jog wheel..) but then i open the aggregator it says devices are not connected despite the fact that they are connected via usb cables, making a long story short the traktor recognizes the cdj 350's as controller but not a sound cards same for the macbook can some one help
i see there's no way to connect a cdj 350 to traktor in a Macbook. should i shell out my pioneer cdj's?
what are you talking about? you can connecht your cdjs to your macbook.
i'm trying to say that i didn't saw anybody here who said they could control a cdj 350 with traktor in a macbook
For any users with issues outstanding in this thread, please open your own topic and we will address your issue there - this thread has become a free-for-all.