Have a feature request or suggestion? Post your idea here!

Post

2 Follower Folgen
0
Avatar

CDJ 900 and Traktor 2.5

PLEASE PLEASE HELLLLLLLP!!  

I have been using the CDJ 900s as a controller (PC Mode) for Traktor 2 for the last 6 months or so  and it has worked perfectly until recently  I updated to Traktor 2.5 and the CDJs seem to be sending a constant control signal into Traktor. (The blue control light on the main Traktor screen stays constant with the odd flicker) It doesn't seem to effect the performance of the deck so far but I am paranoid it is not right and will go pair shaped in the middle of a set.I have updated latest firmware and reinstalled Traktor but still can't get the light to come on and off only when i touch the platter or buttons etc. Does anyone know why this is happening and will it effect the overall performance?..In the past the control light only comes on when actually touching the deck.. Any other controller I use through Traktor works fine and the control light turns on and off when it should do, which makes me believe it is the deck and not Traktor.  Cheers 

Tim

Post ist für Kommentare geschlossen.

Datum Stimmen

8 Kommentare

0
Avatar

@Tim > Did you update your mappings? Did this resolve your issue?

Gavin 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Thanks so much on getting back.. I am about to have a nervous breakdown with this!! 

OK.. I went to preferences-controlmanager-Device list..... Removed the 2 files called cdj 900. Followed the instructions in the above link. Turned the deck off and on like it said but the same TSI file keeps coming up and its doing the same thing!.. I think I may need the new tsi file to get this lot up and running. Is there any way I can be sent it or how I can get it.. Losing the will to live :(

I have taken a photo of what I have ended up with after going through the above instructions. Should I not end up with 2 tsi files? 1 for each deck?? Your help is greatly appreciated

Tim 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Could someone please send me the new HID tsi file for both decks please? 

Tim 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

The TSIs are included in the Traktor software. You have only to delete the connection in Traktors controller editor, with disconnected CDJs, then delete the connection within the controller manager, close Traktor, restart Traktor, connect the CDJs and the new TSIs would be loaded..

DJ Wile C 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

I have done what you said and now in my device list I have CDJ 900 and CDJ 900 (2) but the control light is still on continuously with the odd flicker. I have taken a picture to show you where I have got to so far (you can just make out in the photo the control light)..... Im not touching anything on either deck. I just don't get why the control light is on all the time??

Tim 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

I think, you should write an email to the traktor support. My controller light is always on, because i send midi-clock into traktor for syncing

DJ Wile C 0 Stimmen
Aktionen für Kommentare Permalink