[OPEN] CDJ2000 NEXUS stopped playing?!?!

@Felipe Costa  @Pulse    i have the same problem with my cdj-2000 nexus firmeware 1.23

i have the problem with one of my cdjs ,i put usb in other cdj and it works fine

@parsasaffarzadeh > Engineers are looking into @Felipe's issue. Could you please tell me what kind of USB device you are connecting when you have this problem?

i have the problem with these (sandisk Ultra usb 3 128 GB) (sandisk cruzer fit 16 GB) (WD my passport 2 TB) at the fir i connect them in the middle of the track it going to emergency loop and its not recognized the usb after a several connect and disconnect it s recognized the usb but same problem but in this time it play 2 track and it s going to emergency loop !

thanks for your help and i appreciate 

@parsasaffarzadeh According to the technician who analyzed my equipment. The problem is in the power of the USB port. The voltage was varied when it is inserted a pen drive high-speed or an external hard drive. Try putting a pen common drive with usb 2.0 and see if it will happen the problem.

@parsasaffarzadeh > If it only occurs with specific USB drives, it could well be an issue as @Felipe describes, but if those same devices work perfectly on another player, it might be that your USB port needs repair.

@Pulse  @Felipe Costa with usb 2 flash memory i check ,i have no problem .but i have the problem with one of my cdjs when connecting usb 3 stick and hard drive ! what should this happen ?why voltage is varied in it ? how should be repair ? do i have to change the usb whole section on cdj ?or it just a small piece of electric part that can replace ?   thanks for your help realy appreciate 

@parsasaffarzadeh I took on technical assistance, there will indicate you the best way to repair. I believe it is necessary to replace the USB board if it is really the problem. I have helped you my friend!

thanks for your help @Felipe Costa <3

Hi

I have the same problem with one of my cdj-2000 nexus , when i play from any usb or hard drive suddenly it s going to emergency loop and my usb light turning of ,i have to take the usb out and put it again i test with any usb and hard drives (USB 2 , USB 3) , i check the the usb connection the usb fits in it perfectly i almost update the player to latest firmware which is 1.30 buy have this issue can you help with this problem .

wait for your kind reply

thanks