[SOLVED] CDJ-2000 - No Audio, except random popping sound

The CDJ2000 appears to function normally, but there is no audio output from the analog outputs, except for some random popping sounds. It will cause the inputs on my DJM800 to spike when the pops occur. I haven't tested the digital outs yet. Will test that next.

Miguel Medina 13. Juni 2013 16:56

Post ist für Kommentare geschlossen.

Datum Stimmen

7 Kommentare

Survey says?

Pulse 21. Juni 2013 17:03 0 Stimmen

CABLE

Jay 21. Juni 2013 17:11 0 Stimmen

Digital selected on analog plug ins.

Jay 21. Juni 2013 17:12 0 Stimmen

@Miguel > Did you find the cable to be the problem?

Gavin 1. Juli 2013 16:03 0 Stimmen

I tested the digital output going into one of the digital inputs on my pioneer DJM800 and it works fine. I'm aware of the digital / analog switch on the back of the mixer, so that's not the case. I've also swapped cables and tested the audio cables on a known working unit. Could it be the audio interface card itself or is the whole system board shot? The fact that the audio works fine on digital tells me that the optical pick up is fine and all I my functions, buttons etc work fine on the CDJ.

Miguel Medina 1. Juli 2013 17:36 0 Stimmen

@Miguel > I can't honestly answer that, you'd need to contact technical support for an answer.

Gavin 2. Juli 2013 15:21 0 Stimmen

I suspected that. I suppose no one on this forum has experienced this. In such case, I'd say to close the case. Cherish

Miguel Medina 2. Juli 2013 16:29 0 Stimmen