I HAVE DOWNLOADED THE DRIVER FOR THE DJM 2000 RELEASED ON NOV 26TH 2015 FOR EL CAPITAN 10.11.1 BUT HAVE MISERABLY FAILED TO GET AUDIO OUTPUT. I HAVE THE LATEST FIRMWARE VERSION INSTALLED. ANY IDEAS?!
Post ist für Kommentare geschlossen.
@Richard > Need a bit more information ... what software are you running and have you created an aggregate device for the input/output audio interfaces? Watch this video for info on configuring the DJM-2000 for recording and setup info, right up to the Audacity recording.
Thank for the response. I viewed the suggested video and tried out the instructions using audacity to no avail. The software gives an error message advising to check the settings on the DJM 2000. Prior to upgrading to El Capitan, I used the mixer in question as the playback divide in the system audio settings and everything worked perfectly. Upon upgrading the OS and driver, each time I select the DJM 2000 usb as the playback device, I get absolutely no input signal going to the mixer. I have trie it with iTunes, Virtual DJ 8, VLC and it issue remains so. When I use the built in device for audio and connect the output to the mixer, it works normally. Thus no problem with the nicer itself. I have also used the mixer as a midi device controlling Virtual DJ 8 with no problem apart from the fact that no audio comes into the mixer. The driver works well for midi control but no sound!!
Can you go to Applications > Utilities > Audio MIDI Setup and tell me if the DJM-2000 shows up twice in the list of Audio Devices?
TH DJM SHOWS UP TWICE WITH BOTH THE INPUTS AND OUTPUTS GREYED OUT AT THE MINIMUM
That's good - so you have one input and one output device. Next, create an aggregate from bot of those devices, per the video.